I like the Procomm script option also before you go and pay the money for OTM. A concern I have with the SEB's is that correct me if I am worng, you also need the server part to program the Trigger words and what not? So this can be a very expensive route.
Yes you will need to program each SEBll, they also have a new SEBea device that will receive SNMP traps and filter them traps and forward them onto the Iris server for alarms management. It is a very versital system that you will be able to run vertually any scripted you need for you situation.
You can configure the Cisco Gateway pri as a Nortel Sl-1 Network Side and configure the Nortel PRi as the SL-1 user side and utilize the MCDN functionality.
My opinion is if you Nortel in your enviroment and you want to try VoIP, you should leverage you existing investment with the IP enabled...
Since there are connection to the PBX you just need to get the active IP address. Write it down, when you get back to your pc Ping the address. If it comes back with a echo disconnect the cat 5 to the tranceives and try the ping command again. You should have no echo's. If you understand the...
You need to make sure you have properly Subnetted out the PBX from the rest of the Corporate lan and have a gateway to the cusotomer lan. The Nortel does not like broadcast and these could cause problems.
Does anyone currently have SNMP configured into there network. We are setting up SNMP across our network and have some questions with OTM-sending up_stream alarms to Hp
_OpenView and sendig them direct from the Meridian 1. Basically my question has to do with understanding the MIB's presented to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.