Search results for query: *

Are you using SIP lines or POTS lines? If using SIP, the "dial tone" you are hearing is fake - it is only generated by the PBX to make users more 'comfortable' because that is how POTS operates. So if an IP phone is connected to the PBX correctly, you'll get the 'fake' dial tone, but it doesn't...

From your description, it's easier to 1. In CO Settings, DIL the line(s) to a an ICD Group (example, 601). Now, calls to that line(s) will ring at that group. 2. In ICD Settings, under Member List, add the extensions who you want to ring to ICD 601, set them all to "Immediate" 3. Relax

I run the unified software just fine in Win10. Although I haven't tried the USB drivers though - nothing to test it with (yet). But connecting over IP works just fine.

The NCP/TDE systems need both System Firmware v8+ and Card Firmware v8+ to accept the NT5xx phones. Without both, the phone will work but the display will fill up with zeros.

Put the TDA's DLT lines that connect to the TVA into CoS 7, so the voicemail system is unable to dial out. Then create a PS on the TDA that forwards to the cellphone number. Then configure the mailbox's personal custom service to assign a button to transfer to the new PS ext, which goes to the...

If you're not using the built-in ESVM for voicemail, you can upload WAV audio files into the OGM slots using the software. WAV must be 8kHz 16bit mono. Set SVM to OUS, then disable the ESVM. Then use Utility > Message Transfer from PC to PBX. Tell it what slot/OGM to upload into (this can be...

Not sure how to do this with PT extensions, but if you could use IP extensions (KX-NT343 for example) then that would just tie into their existing data network. The problem is the TDA is not network-compatible (USB only), so you would need either the IP-EXT card or upgrade the MPR card to the...

In TDE/TDA: 1. Make sure you have enough SIP Extension licences in the MPR 2. Add the V-SIPEXT card, configure ext's and passwords In X-lite (account tab): 'Name' as anything 'protocol' as SIP 'user id' as ext# 'domain' as MPR IP address 'password' as password in step2 'display name' as...

Using SIP trunks? POTS?