Search results for query: *

Hi Ya, The latest current version is V3 R0.33!! Released just last week. Is available from the UNIFY partner portal download center is you have log in credentials you can easily obtain this. Not currently on the OSBiz image as yet, but V2 R1 being released very shortly will rectify that. Its...

Hi there, I,m afraid that there is no such function on a Realitis DX. The "Hunt Groups" will only do Cyclic (Distribution Group) or Linear (Hunt Group) searching on incoming calls. The only way to get a Realitis DX to call a group of phones simultaneously is probably with the introduction of...

Thanks SBCSU, I had been through that document, but was searching for *248!!. Its is exactly correct as the extension we used to test this call has an "Immediate Forward" active on it. Thanks for helping with the clarification of the message anyway. Kind regards Simon

Hi there, I have been trying for a few weeks now to discover the definition of a DPNSS "Set-UP" message I believe is causing an issue with routing calls over a private network. The initial service request message (ISRM) is as follows:- "> R01909 SSRM(I)...

Thanks for the info, I will be talkwing to the customer IT department about the password as it does look as though that's the issue to me also.

Can anyone shed any light on this subject for me. We have a customr with a unified Xpressions Version 5. On the Voice side of things, everything appears to function as expected. However, most of their user have the voicemails transmitted to their emails as an attachment file. The Xpressions...

Hi Denis, Well done for translating the documantaion in the document I attached into the later AMO's I did give a quick glance yesterday when I was actually on a V5 switch during the day, but I hadn't had teh chance to log in and add this to the thread. Glad to have been of some help at...

Hi If you are referring to GKREG:99 above it is the IP address of the HG1500 card. As for the SIP tab on V8, I am assuing youmean the SIO settings on the HG1500 card. These should be ignored as you are using CORNET-IP (H323) and the TRUNKS should be configured as such in the IP Trunk Section of...

Hi guys, Apparently, if there is a customer password set and they have accessed the System Spped Dials in the menu, then it is taken away from the Engineers level users. The solution is to log in as the customer and it re-appears!!! Job Done!! Thanks for the suggestion though!. Cheers Simon

Hi Denis, How have you got your GWDIRNO configured in WABE? There are two methods available, i.e. Closed numbering or Open Numbering. Closed numbering would require you to set the number up as a STN with an NWLCR configured to access the Gateway card trunk group with a specific "DestNo". Or...

Thanks for the reminder Iamnothere, Wasn't thinking about the version when I replied. I'd forgotten that there are some new AMO's to consider. BFDAT for IP Gateway Board configuration. for one. Am looking for a more up to date document now. Stand by!

Hi, The previous answer is sound up until the point of switching the system off! It would be far nore advisable to use the folowing AMO. EXEC-REST:SYSTEM,RELOAD,STD; This will restart the RMX and the UNIX. Be patient, these babies take time to load. Even the new ones!! Good luck Togtek

Hi Denis, H4K documant attached to this answer. Regards Simonhttp://www.mediafire.com/?3clp1jc6831lbhv

Hi Denis I have some documentation that could be helpful for you for both the 4K and the 3K. However I do not seem to be able to attach them both easily. Si I have had to set two answers with different attachements. Kind regards Simonhttp://www.mediafire.com/?o6uffs5x7u8lw69

Hi I have recently become more involved with Hipath 3000 and have noticed that we hae a number of Version 7 systems that do not show the System Speed Dialling 'tab' is not shown under System Parameters sub menu. Is this function not available at Version 7? Many thanks in advance.

Hi, Just browsing through looking for DX Messenger info when I stumbled across this thread of yours. If you have managed to obtain the IVmail filter and V24 cable, you will then need to know how to log into it. If you are still interested I may be able to assist. Let me know. Kind regards Togtek

Can anyone help me in locating the following item. It is described in the Manual as a PWXV Controller. I have managed to also locate a Fujitsu Siemens Item Number as:- D:GP71F-CW50 After much searching around the internet and other contacts I have not been successfull in locating this device. It...

Hi there, I'm not familiar with the ROLM 9751, but if you can explain what the feature code does, it may help with looking for the comparison on the Hipath 4000. This is becuase you can configure the access codes for everything on the Hipath 4000 to suit what ever you require. However, there...

I am looking for a replacement for an MSV1 Board to support the Synchronous V24 connections to Hicom 300's from the Manager server. It is a version 3.0 Manager on the Unix Platform. The card will be a PCI type card(I think!). I have found a part number L30280-G600-A650 and I am also looking for...

Thanks for the tip donb01, however it was not either of these. I have delved in a bit deeper this morning and discivered that "engr" is not the username on the HTS verion of the software. The user is htssvc0 instead, has exactly the same rights as engr does on Manager, and also it is the same...