I have a Phaser 860 DP that needed the pre-heater bulbs changed. I found the instructions online and replaced the bulbs. When I turned the printer back on it starts up and runs for about 30 seconds and then the front panel reads Paper Jam open front cover. There is no paper jam. I have changed...
Bluedog801, Is the printhead having problems right now? What brand of aftermarket ink are you using? It has been my experience that some after market brands are better than others. the after market brand I use warranties their ink and the printhead for failure. I did have one printhead fail...
I had one of our Phaser 860 Printers do this same thing on a Cyan line. I was able to recover the head by creating a document that put a 100% cyan stripe down the entire page right where the printer was not printing cyan (I used Corel Draw to create the document). Then I would print 200-300...
IkonTech,
Has the printer recently been moved? Sometimes if the printer has been moved with ruff handling then the printhead can be moved out of adjustment.
The full potential of the Gigabit Speed will be used if the Server or Servers are also connected to the Gigabit Switch.
If the PC's are at Gigabit and the servers that these PC's access for these large files are on 10/100 the there will be a bottle neck.
The best thing to do is Put...
I had a Phaser 8200 do this and I replaced the paper tray itself and it resovled the issue. We had an 860 and took the paper tray out of it and swapped it with the 8200 and not problems since.
Creg,
Sorry to hear about your misfortune as well. I will tell you what I have learned from talking to a guy who serviced these printers for 5 years. In my case when I do the Eliminate light stripes the lines are there but they are a lighter shade than the other lines. So he told me to make...
I have a Phaser 860 that is haaving a light stripe problem. It is on lines 99 and 97. When I do the eliminate light stripes process the print out after show both lines 99 and 97 are there but they are lighter in color than the other lines.
Any ideas on what the problems is or fixes for the...
Dany,
Yes I have tried the eliminated light strips routine. I turned the printer off for at least 12 hours and nothing. What is the Cap/Wipe/Purge? I would like to check it if I knew what it is.
What sensitive parts are on the printhead. My understanding is that the printhead is several...
Dany1,
It is a bad image problem. There's a verticle band -- light stripe -- about an inch from the left edge of the page. It is the cyan color that is not getting through. I have thought about taking it out and blowing it with compressed air. Or I even hear about heating the printhead up...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.