Search results for query: *

I'm having the same problem but it just started on my BCM400. Feature 986 used to work just fine and now none of the phones in this BCM can use the Transfer to VMX button. However, i am able to manually press transfer and send the call to the vmx DN. Any other suggestions as to why this...

Thanks for the suggestions guys. The first 3 loops are Provisioned, the DID's do come in on the PRI. Everything else seems to be pretty straight forward. A Nortel Rep mentioned that Lines 181-186 should show up under Enabled Physical Lines, which mine do not. All i see are the lines for my...

Hey SD, Here's the config that i have set up: Slot 1 = DSM32+ Slot 2 = BRI S/T Slot 3 = DTM (T1) - Pool A Slot 4 = DTM (PRI) - PRI A Programmed Bus Type for BRI module = Trunk Module type = BRI-ST, 4 Loops 301-304, 1-3 are provsnd I have 6 ISDN/DECT DNs 5721 thru 5726 all set as...

Has anyone successfully set up a video conf call using a BRI ST module on a BCM 400? I am unable to complete a call or receive an inbound call via the BRI module. I have 6 DIDs that are associated with 6 Companion DNs. Two DNs per Loop with a total of 3 Loops. I also have a Target Line...

The interfaces are different (Element Manager vs. Web Browser) but the concepts are the same thing. Once you get experianced or comfortable with one, you should have no problem adapting to the other.

Thank you for your reply, i found out the correct pinout for the cable finally. Turns out it was that simple. Thank you for your help. id07355

Has anyone had problems with Visual Messenger msgs showing up hours or days after the vmx was recorded? I have seen instances where the messege shows up late and am unable to find a reason why. Anyone? id07355

Is anyone familiar with the configuratino settings for a Lantronix UDS-10 that is used for telnet access to an Octel250/350? I am looking for teh correct port settings to allow telnet access. Anyone? id07355

If anyone can help me out, i'd really appreciate it. I have mermail on my option11 and when a user is in leaving a vmx, they have the option to press 0 and exit out to an attendent. That paramter is not set up in Mermail and I dont know where to set it up. Anyone have any ideas? Thanks in...

I understand that the best way to test it is to do it but the site i'm concerned about is in WA state, i'm in ND :) Guess i'll just have to ship one out and try it. Thanks for the info everyone. -c-

Can anyone verify the M3904 phones will work on an Option11 running Release 25 version 2111 Issue 10? Please advise, I am looking to get rid of my 2008s and 2616 and replace them all with 3904s. Thank you. id07355

Alrighty, I want to thank everyone for taking the time to reply to my post. One last question i have is this: I know i need a cable to connect the CCF card to the telnet port replicator, it looks like a 9 pin to 15 pin, but does anyone know what the pin out is? I am going to try a straight...

Thank you CMAWBEY, that looks like it did it.

Hey Everyone. I have a question on how to adjust/change the ringer type on an M2616 phone. Looking through the handbook doesn't state anything helpfull. Does anyone know how to change the ringers on these phones? Thanks Clyder

Thank you for your reply. Yes we have had some changes now that i think of it. Some security patches have been installed and also a newer version of antiviris software has been installed. But i also have the client installed on a seperate pc. It almost sounds like it could be something with...

Does anyone know what this error msg means? Reverse RPC connection with Admin Server cannot be established. Whenever i try to create/view/delete a mailbox i receive this error. Does anyone have any experiance in dealing with CallPilot at all?

Alrighty, thanks everyone, I've found part i need, we had some com to ethernet adapters lying around here. Now my next question is; Where do i plug into on the Controller Card on the Octel. I am assuming the LAN com port on top? Right now we are using the modem com port on the bottom for dial...

Hey, thanks for the super fast reply Don. So a port replicator huh? I am assuming that is some type of ethernet to com port addapter i need to pick up? Any idea if any old kind can be used or is there something special that may have to be used? thanks

Hi, i have an Octel 250 and am using dial up access to it. However, due to a new product we recently aquired, i would like to setup Telnet access to the Octel. Does anyone have information on how to set this up or know anyone who does. Out with the dial up and in with the telnet. Thanks in...

www.area-codeinfo.com