Search results for query: *

We are also in the same situation, Exchange 2019 has been released recently and still the last version they support for VMPro 10+ is Exchange 2013. Is anyone running VMPro 10+ with Exchange 2016/2019 or know what's the issue?

1. Yes, I also changed the settings for unopened messages with the same result 2. I did clear out my mailbox to test and it's still the same. 3. If they re-record over an existing message the delay is added, if they erase it and then record again there's no delay.

I've got the exact same issue as in this thread http://www.tek-tips.com/viewthread.cfm?qid=1779263 If we listen to new messages it will always play the oldest new message first in either FIFO or LIFO and then we must loop through all the old messages to get back to the other new messages. We...

So after reading the most recent admin guide for the B179, it says to put your own avayab179.xml file on the server... I've configured the B179 with all the wanted parameters and exported the config file locally, I removed the account info from it and uploaded it on the HTTP file server as...

Our DHCP 242 is set to : MCIPADD=192.168.40.30,MCPORT=1719,HTTPSRVR=192.168.40.30,L2QVLAN=40,VLANTEST=0 Now, the options I get from the https://192.168.40.30/avayab179.xml?phone_model=avayab179 url doesn't match the DHCP options so it must be somewhere else Here's the output of the...

Sorry I forgot to mention that I did test. The url is coming back with some settings. It's the same issue with the firmware xml file. We are running r10 sp4 server edition

For the life of me I can't find where the B179 is picking up its config file Here's the device management log of the B179 Running device management Mon Dec 31 19:01:36 UTC 2007 /etc/config/avayab179.xml AVAYA:provisioning:dev_mgnt:use_dhcp_option false Server URL: https://192.168.40.30 fopen...

From what I found it's supposed to, but I can't get my SR140 virtual fax board to send and/or receive over 9600bps. We are running CM 6.3 and the SR140 is using h323 to talk to the CM. MG is a G450 (MP160). If I force the SR140 to g711 instead of t38 and set the codec to use v150 for the modem...

Disable the popup blocker in IE, you will get the screen with the instruction when you click on the other buttons.

Yup it match, i realy dont understand this one... => prt elnk ACTIVE ETHERNET: "PRIMARY" "192.168.200.1" INACTIVE ETHERNET: "SECONDARY" "192.168.200.2" OK .stat elnk ELNK ENABLED Ethernet (qu unit number 0): Host: PRIMARY Internet address: 192.168.200.1 Broadcast address: 192.168.200.255...

After rebooting i still can't access the server...

WOW, i dont know what i ping when i said it work but it doesnt... i tried with the 0.0.0.0 route and same result... I can ping the ITG card but not the CallServer!?

the enl/dis of the ELNK did the trick, i was still unable to enl the route but the Server responding. Thanks, you saved me some hairs

Hi, I am trying to add a route/gateway to the Call Server. From PCs on the 192.168.200.0 network I can ping the server (192.168.200.1) but when i try from the other side of the router i cant, it's not a permission/rule issue since i can ping other PC/CallPilot on the 192.168.200.0 network. I've...

Great, we don't use that feature. So I changed the CPK from 20 700 (7000 to 7199) to 19 701 (7010 to 7199) Now the 4 DN that I needed are free (7001 to 7004), NICE. Thank you all for your help!

700 to 709 are type park, can i unpark 700?

Ok, the DNB and LUDN type didn't show me the desired DN DNB gave me a bunch of 700 (TYPE PARK) LUDN gave me DN in the 7400 to 7999 range Is it possible I need to "activate" the 7000-7399 range?

I am trying to add some ghost line with the DN 7001 to 7004 but i get PHANTOM DNS MUST BE DEFINED AND BE UNIQUE. So i did a prt of the DN 7001 and it says NO ACT SINCE NO DATE Where can i find if 7001 is used or do i need to specify the digits available fo extensions? Thanks