thx for your answers.....
@janni78
I tried that but the DDI didnt work in my test system... maybe its not working since its behind a different pbx... but in the monitor files its showing unknown number even its not showing exactly what its going to dial.... Maybe it has something to do with...
Hi there,
I would like to build up the following:
There are 100 extensions from 100-199
There is one PRI 02222 3333 XXX
Customer want that on every extension the call get redirected to Voicemail Pro to check various things ... Office hours / holidays / emergency mode / etc
but after that he...
Hi there,
I have a customer with IP Office Server Edition 9.1 with a Primary Server & 500v2 Gateway
Customer is using Twinning and want to see the Caller ID...
1.) On digital phones connected on the 500v2 gateway (digital phones and PRI is set on the 500v2 Gateway) everything works as...
Its only reported once but very serious at all....
I guess one of the suggestions will do... but I'm still scared that this issue will come up again...
cheers,
subx
I'm sorry but we cant duplicate this issue... But its a critical error since this customer has sensitive conference calls :( I just dont know where to start and what I can do to fix this issue....
Hi there,
I have a customer that just recently experienced a problem about a conference call. The customer created a confernce call with two external users. During the conference call they could also hear another internal user that has not been part of this conference. This internal user has...
The customer who is using the 1102 (not the 2102!) got this advise from Nortel directly. They said it will work very fine... but now he has some problems to reach the extensions...
I thought since Nortel recommend this product somebody knows about it...
cheers,
subx
Hi there,
anybody here who knows the product Mediatrix 1102 and connected it to a BCM 50. Would be nice if you can post a "How to" or config file!
I can see already that calls are comming in but it is still rejected with unknown number even I set up already this number for one port.
kind...
Is it possible to forgive same hostnames several times? We have a system where all MGC hostnames are equal, as well as the DSP hostnames.
Does this affect the system in anyway. It is a geographical redundancy system with many remote IPMG´s. Having Problems that if the IPMG goes in the local...
***Additional Info***
I found out that even the Att (M2250) isnt able to access CP in the right way... CP is connecting but dont accept any mailbox number and disconnect after you pressed # on the console. If the Attendant is connected to the CP and the mailbox number is entered without # after...
Hi there,
we have a customer that uses various CS1K Systems. The problem right now is that if the customer send a caller (internal or external)from location a via Attendant to the CallPilot on location b the call will be dropped after the user enter the mailboxnumber + #. If the same call...
paylod should be the same as on the CS1000 as mention in this thread already... change it on the BCM System since the CS1000 is always good for a Master ;O)
Codecs.. You should use G729 .. G723 isnt really that good quality at all... G711 will probably not work because of your bandwidth...
QoS...
Its not possible to go back to Auto Attendant again... You can send it to a info mailbox and record there a text..
The question is ... are you trying to get a loop or what should happen after the second time?
If it should always ring and then after some rings you need to hear a waiting...
Nope the only difference will be that you will get more Features since there is MCDN over H323 possible.
For the performance its more important what codec or payload you will use as well as bandwidth and of course Quality of Service... That would be the first thing you should integrate...
option11newby:
Yes I did this check and there was an error about the files size of the CDR data.. but of course I did delete these files as written in a different thread here.. After that everthing was showing OK... Also the check in the upgrade didnt show anything wrong so it started...
Hi there,
we have a BCM 1000 with current rel. 3.6
I did try an upgrade from 3.6 to 4.0 but it failed... after 2 hours non moving i gave up and tried again... but nothing happend. Anyways i thought about imaging the disk to 4.0 and start there... but also here it dont work... when im checking...
Problem solved. It is possible to define different sources and directory members in the upload tab. The include and exclude dn files are shared for all sites.
My goal is that i want to use different corpdir files
(with included and excluded DN)in different pbx´s created with one TM. Multiple sites are already configured. It is only possible to share one corporate directory report
with multiple pbx´s.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.