Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. DenneyM

    suggestions on grounding??

    thanks for your help.
  2. DenneyM

    suggestions on grounding??

    I have been tasked with correctly grounding a 200' shielded cat5e that is being used soley for the purpose of injecting power into a WiFi hop (skypilot). I have been told to ground only the foil shield on one end. Both ends. And I've been told that grounding the shield will not ground the pairs...
  3. DenneyM

    button assignment

    Found it in the manual. Select 3 when assigning the line to select which button to assign it to. Thanks Me. I read right over the top of it 10 times before I saw it. Sometimes you get there faster driving slower!
  4. DenneyM

    button assignment

    Went through the manual and quick reference guide, and must be overlooking how to unassign line (4)from its line button to then assign line (5) to the line (4) button on a partner 6button. I've assigned line (5) to the extension, but it is not showing up on the line buttons. I've unassigned...
  5. DenneyM

    PMVS R.5

    thanks.
  6. DenneyM

    PMVS R.5

    Can I set up a dial by name directory with the PMVS R.5? If it is capable, where can I download a manual?
  7. DenneyM

    button assignment

    Thanks!
  8. DenneyM

    button assignment

    Looking at assigning line (5)of the system to the Line (4) button of a 6 button partner phone. Any ideas??
  9. DenneyM

    renaming extensions

    Can you reassign a 3 digit extension to a Partner 308 R.6. The customer was interested in keeping the previous extension numbers from their old system? 201,202,203...etc...
  10. DenneyM

    night service chirping!!!

    Partner 6.0 308 / 2x16 PC Large voice mail. I have the system set on night service for all day all night. The 8 extensions are all set to "no ring". When an incoming call comes in, all of the extensions do a chirp or half ring and then it goes to AA. I need the half ring to go away. I have...
  11. DenneyM

    extension voicemail wont pickup!

    Thanks Fondog2. I went through that this morning. It ended up being the Automatic VMS Cover that wasn't even assigned. Thanks again!!
  12. DenneyM

    extension voicemail wont pickup!

    Thank you! I haven't tried it, but I already know you're right. That was a dumb one for me to miss. Thanks again!
  13. DenneyM

    extension voicemail wont pickup!

    Had a system lose all programming over the weekend. Started from scratch this morning. My question: when you call/transfer to someones extension internally or externally thier voicemail never picks up. If you use direct vm transfer it picks up right away. I've rechecked my steps from this...
  14. DenneyM

    AA transfers to operator after short pause

    R.7 processor / 1 308 ec / R.5 PMVS / 5 slot carrier. I have selector code "5" set up to transfer to my call group "2" / ext. "72". The system was transfering perfectly to the extensions in group "2". Now when the caller selects option 5 the AA says "your call is being transfered", it gives...
  15. DenneyM

    loudspeakers

    R.7 509 / 308 ec / pmvs R.5 How do I assign the loudspeaker port on the R.7. I believe that it is different than the other releases. I know I have to assign it to an actual line but I'm not sure of the # code for this. Any help would be great!!!
  16. DenneyM

    Auto Attendant issues

    have the callers hit *7 when they hear the AA pick up.
  17. DenneyM

    Partner R7 Auto Attendant

    It sounds like your Hunt Group 7 has the wrong extensions listed.
  18. DenneyM

    selector codes

    I have to press # to save the menu definition changes. That's the second one I've answered on my own. 2 for 2 today. Thanks anyway.
  19. DenneyM

    selector codes

    I can't seem to get the PMVS R.5 to save or initialize the changes I'm making. Here's what I'm doing, I've set up a call group (2) to have extensions 10,13,14,15,& 26 ring simultaneously when the caller pushes selector code 5. The problem is that when I set the selector code to ext 72 and then...
  20. DenneyM

    calls routing incorrectly

    had the wrong extensions assigned to hg7. thanks anyway.

Part and Inventory Search

Back
Top