Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Press2Esc

    Cannot copy - Sharing Violation Using RDP

    Error copying file or folder" "Cannot copy wfse. There has been a sharing violation. The source or destination file may be in use." I suspect you have a related service or program (wfse?) is running. Check TaskManager for wfse or something related to the application. What is the name and...
  2. Press2Esc

    Linksys Wireless router WRT54G v2.2

    Steven, 3Q's - Does the business use a single or multiple static IP? - What type of internet access do you have (e.g., cable, dsl, T1, etc)? - What is the equipment the Linksys (WAN/Internet) is directly connected? I am guessing your Linksys may be mapped with a static ip and running in a...
  3. Press2Esc

    PI IP Space and Routing

    PI IP applications?
  4. Press2Esc

    Convergence With Cisco OER

    I have no experience & little knowledge of Cisco OER. Is this a software load balance/router protocol or is this a hardware router? Why not consider a dual-WAN with an full-time aggregate WAN connection, load balacing and failover capability? When one WAN connection to one of the data centers...
  5. Press2Esc

    ISP Issue

    You should verify the port(s) (50-51,500-IPSec, 1723-PPTP, 1701-L2TP) are open for in the router to allow for VPN traffic to passthru the firewall/NAT.. P2E
  6. Press2Esc

    Is this a faulty ADSL line?

    G0AOZ, maybe step it down a notch, son.. Using industry acronyms/buzz-terms (BT Master, NTE5, router line stats, etc) with non-industry people is comparable to speaking chinese to the french. I am in the industry and I dont even understand your #3 reply. Did you mean to say, try another...
  7. Press2Esc

    I need someone to help me using Remote Assistance

    if you are asking, can someone remotely access your system to assist you w/cookies config. the answer is yes & yes. P2E
  8. Press2Esc

    Nortel VPN Client won't uninstall

    perhaps you need to be logged in as admin or have administrative priv to remove the app? P2E
  9. Press2Esc

    Hp laserjet will not work with remote desktop

    Hmmm, beginning to smell like a local firewall issue... Not 100% sure, but I believe File and Print Sharing use 139 & 445(TCP) & 137 & 138(UDP). P2E
  10. Press2Esc

    Recommend a Home ADSL Modem Router?

    Ah, I see... After retiring both (several) Linksys & Netgear routers, I assumed that all "residential-grade" wireless routers were designed under the auspices of "you get what you pay for..." So, I decided to do a little research & found several (technical) ratings that listed the Dlink...
  11. Press2Esc

    Recommend a Home ADSL Modem Router?

    stduc, nothing special 'bout dsl router - besides everyone has their own opinion about which dsl router is best... All dsl routers (e.g., westell, 2wire, netopia, efficient, siemons, etc) should pretty much have all the functionality needed for "home" users. Of course, you would need the...
  12. Press2Esc

    shdsl question with netopia 4553

    aureliusster, what are trying to accomplish? Is this a new connection? having a problem? Just inquiring? dont get bogged down with terminology. NAT, routed subnet, etc arfe default conditions for all DSL routers. is your setup not working? P2E
  13. Press2Esc

    DSL randomly fails at startup

    General" info to bridge speedstream... 1. Determine the dsl router's default ip gateway address to access the modem GUI interface. See yellow sticker on the modem or run ipconfig. Note, make sure that TCP/IP in the local area connection settings is set for “Obtain an ip address automatically"...
  14. Press2Esc

    DSL randomly fails at startup

    yes bridge (aka bridged ethernet) the speedstream. if not, you have 2 routers connected to one another - which usually results in unpredicatable (aka intermittent) network behavior. never connect a router to router... P2E
  15. Press2Esc

    DSL randomly fails at startup

    sounds like your dsl and network router... the dsl router should be "bridged" (no internet light) and the network router should run a PPPoE connection... this will solve your prob. P2E
  16. Press2Esc

    Is this a faulty ADSL line?

    Sounds like bad filter(s) or a problem in the dsl line.... Since DSL is digital there is positively NO filter ciruit in the DSL side of the DSL filter... Actual filters used in DSL filter are actually a passive band-stop filter on the PHONE side of the line. You can actually surf into the dsl...
  17. Press2Esc

    Need help making 3 platform network static

    Under TCP/IP, click on Config and set the IP info manually. P2E http://screenshots.modemhelp.net/screenshots/Macintosh_OS_v10.1/System_Preferences/Internet_Network/Network/TCP-IP_(Configure).shtml
  18. Press2Esc

    How to access CP from behind firewall.

    Does the router/firewall have HTTPS (port 443) open a/o forwarded? P2E
  19. Press2Esc

    multiple IP address

    Iam confuse too.... I cant even follow your issue, much less you IPs. P2E
  20. Press2Esc

    Particular apps denied through Web Access

    perhaps a licensing and client registration issue? P2E

Part and Inventory Search

Back
Top