Search results for query: *

Read FAQ Above to access Gigatribe for DERT

Hi XDM - can you please share with me so as I can put them on the shared file system for everyone - thank you

There is a pdf - not sure how much info is on it - check the FAQ here and then go to GigaTribe as described in the FAQ HFA SIP OpenScape OpenStage iSDX Realitis HiPath DX Rolm 9600 Hicom OSB Software Downloads

Silly Question but if there is a USB Stick in the B node - it might not boot up - there is a setting in the BIOS ?

You'll need to test this - you could temporarily add in your own number and test it that way. You may have to remove the first digit - let me know if it works or not

Ok no problem - You have to add in the CLIMA and then add in the numbers that you want barred. Then you have to tell the incoming trunks to look at the CLIMA table to see if any number there is barred. This was supposed to have worked from V3 - you can add it on in V3 but it does not work. I...

The only way is to use the AMO CLIMA

The only way is to use the AMO CLIMA

Indeed - thanks for that - but the clock will drift which is where the NTP comes in. You can setup an NTP server on a computer on your network https://www.meinbergglobal.com/english/sw/ntp.htm

Well you of course have to ensure that the PENS are signed off as well. REG-BCSU;

An XML file created the V8 - in that XML is the IP address of the NTP server. If it's a demo system then some domestic routers do transmit NTP

DIS-PERSI:SYS; to see the digit length of the signon code (SILEN) then REG-PERSI:SI; To see what the sign on/off digits are. And of course for to check the codes then DIS-WABE:GEN,,,,SIGNON; DIS-WABE:GEN,,,,SIGNOFF; It has happened in the past depending on version that you might have to sign...

Date on V8 is set with NTP - Network Time Protocol

Hi ashraf55 Can I please ask a question - when you press the ON button next to the little display on the EntGW do you have an 'A' displayed on it to indicate that there is a valid 'home system' backup database on it ? Also if you EXE-APESU:SYSMODE=EMERG; Does the system go into survivability...

There is a HFA command that you may be thinking of - it gives the IP addresses in the tabulated form that you mention. It only gives 0.0.0.0 for the SIP extensions. Here is the HFA command for your records. DISPLAY-SBCSU:TYPE=IPSEARCH,IPADDR="*"."*"."*"."*";

So you dial in from external direct into the IVR and it does not accept DTMF ? What kind of trunk is connected - is it a SIP trunk to the IVR -

Check the COT of the trunks that receive the calls to allow DTMF for incoming calls - CHA-COT:XX,COTADD,AMFC;

Hi Keyset6 Plaease indeed try to upload it to engineering dot com and we will see -

Great stuff ! If you have any documentation etc. let me know and I can make it available there on 'GigaTribe' - thanks.

Yeah, it would be DSS - Direct Station Selection - which shows the LED if busy etc. It could be CTRL-C or CTRL-T to connect when you see the line of #### There is an LC WIN iso CD Image and 9005 Config PDF available at faq965-7883