Search results for query: *

Check the power supply on the pim that has the analog card installed that you use for the faxes,change it out,it only takes a few minutes.

http://www.wedophones.com/NecManualsLead.htm

*5 to set , #5 to cancel on most

I really need some help guys , if all possible , even if their is a fix , thanks.

We use the lifter and tried everything you mentioned but still a no show. We thought maybe the surroundings were the culprit and even tried a lower frequency headset , no help.

Need help , plantronics cs50 headset not ringing on our nec 2400 ipx , we use series e and i phones , thanks.

Fine an unused glasskey and program it in Moc to F1090 , should mute handset and headset.

Feature + 1 toggles the mic on and off , red light on mic is on , etc.....

Thanks alot

Have you tried changing out the digital card that the phone lens is assigned too ?

I would like to know how to hook up an adtran csu to the power supply of the 2000ips , I know it goes to the -27 volt but do you keep the jumper in the rg and ground connection or do you remove , if so where do you connect to rg or ground , thanks.

Thanks for the site , looks good , oh to answer your question , public schools , government red tape.

Thanks I did , no PO's

Where can I buy good loop current regulators , would like to purchase from a known dealer that takes PO's as payment , I work for an educational system , thanks for any idea's.

If it were me and this is such a small pick group I would CCC all the numbers in Cmd 160 and build one pick group with all the numbers you need in the group and do like OzzieGeorge said , close the loop.

Try replaceing the phone , I have had three of them in the last 6 years.

Nothing has worked , need help if possible , thanks

Thanks , but it seems all is programmed correctly.

AD-64

Yes , all are programmed. I was wondering if the power supply could be at fault ? Thanks for the reply.