Search results for query: *

Hi all, I have a couple old CNT ultranet edge units that I would like to put back into service. Anyone know where I can find a copy of UltraNet ConfigManager and UltraNet WebView? Thanks for any help! Tim

Hi Thomas28, Thanks for the reply.I've been working with Hitachi equipment for a bunch of years... back to the 7700 standard days. I agree that a bad dimm in one cluster should not be able to cause failures in the opposite cluster. Could be that I had some bad memory on both sides, and bringing...

Update Bad cache memory in the base positions of cluster 2 was causing the failures in cluster 1 ??? I configured the system down to base cache, and the failures moved from cluster 1 to cluster 2. Fixed the cluster 2 failure, and brought the system back to 20gb cache one feature at a time. Seems...

Hi all, Don't know if we have any hardware gurus reading this... I have a USP single frame system that I'm doing a full hardware reconfg on. The system keeps calling out failed cache memory dimms in locations that have none installed. Hardware and SVP are configured correctly (this is one of 4...

Hi mikemateoisc, Sounds like your library thinks the drives are in the 2nd tower... is it possible you have the drive tower sense cables in the wrong position somewhere? Mashed or pushed pins in a connector? If this was a working system, I would look very carefully at any connectors that you...

Sorry, don't have the FSC list for T10000, but sure would like to find a copy!

Hi mletendre, thanks for the replies... got my drives running. the above procedure does set the IP back to defaults. I had cable / host adapter problems. Tim

Hi all, I have some T10k drives off lease that need testing. I've installed the VOP, but the drives have had the IP address changed from 10.0.0.1 to ?????. Thought a quick push of the maintenance switch on the back of the drive is supposed to reset the IP to default, but still cannot connect to...

Hi Andy, no fibre connected... Tried a 9940A drive, and it works fine. I have to ship the libraries in the morning, but next L700 I have here I"ll play with it some more. TE

Hi All, I have an L700E with 1x 9840A fibre drive installed. When the unit comes up, the main screen shows the 9840 status as "configuring". Will not let me mount / unmount to the drive from diags. Tried the same drive in a second L700E with the same code (3.09.00) and it worked fine. The drive...

STKman... Nice to know this about the SL500. I've had to play that game with some STK systems in the past. Iceberg systems maybe? Big fun anyway. TE

Hi All Anybody know what the current firmware level is for the L700E library?

Ahhh... Never mind. Found it. http://www.sun.com/download/products.xml?id=454a7f01

Hi all, looking for a (Windows 2000 server) driver for STK 9940B tape drive. I have a SCSI/fibre bridge configured, attached to a 9940B fibre drive and the bridge connected via LVD SCSI to a W2K server. My Adaptec card bios sees the drive at boot, but windows says no driver installed for the...

Hi Andy, I think the SSU in the 9490 will report the drive and card serial numbers in the 9490s TE

Anyone have an ISS diskette for the StorageTek V2X2? Someone left the "clean" software selected on this off lease box. Sun does not seem to want to give up a copy... Thanks for any help! TE

STKman, you the man. I'll have to do some R&D...

Hi Andy, L1400 is just two L700E connected with a pass-thru port. I think the MPC are the same as L700E...but some additional logic installed to control the PTP. TE

Hey Andy... with ISC now? Give me a shout if you need help with the 9980. I spend most of my time working on 9980 / USP boxes. TE

Hi Steve, make sure the drive SCSI ID's are set in the library menu. The library provides SCSI ID for each drive. If your drives are HVD, be sure to use HVD terminators.