Search results for query: *

Hi Question: where do your route goes? Is it working when you dial directly 2044? Best regards Jean Claude

Hi Try : Telephone

Hi Are you sure that they change only the IP address? Does the customer have also change the domain?

follow alex 6.15 Duplication of group switch General The active side of the group switch is defined with command GSDUI . Active group switch side, is the side from where all GJULs are to receive speech, signalling and synchronization. The group switch side is decided by the connection...

Hi 642234 We can't help you if you don't entre the data in a format readable for all enter the printout of the system like this MonoSpaced Text The character and disapear if you press previous post or submit , BUT the big advantage is that we can see the printout you want us to see in the same...

Hi Check ADC parameter of your phone ; ATS D8, DTS, D10. These should be set to 1 and D4 for both should be set to 0, if you want to send A number Best regards

Hi below the windows where you are writting your post, there is some indication such as E-Mail Notification, Emoticoms/Smiley and Process TGML. Click on the Process TGML link and you will see some wonderfull feature that your present the printout of MD nicer to help you;) there you can find the...

Hi Check D1 of parameter SERV of the route (if you have problem with incoming calls). It should be set to 0

Hi I don't think so. Could you get the FW from your Supplier/Maintainer?

Hi You can download the FW from Knowledge base, MXone, FW/SW Library and then find DRG22i in the table. The latest FW is R2L. Best regards

Hi We have request exactly the same feature. So far Secretaries can be IP, but boss must be DTS. We hope that Aastra will unnderstand the customer request and provide a Boss/Sec feature on full IP extension for mxone V4.

oops - 3214 is an operator DTS Therefore it can only be setup as normal DTS, as you have done, and not as operator. Just for precision if the sec is something else than DTS (ME, GE, DECT, IP, ATS...) you cannot activate the filtering, as you don't have the key function for the Personal Number...

Hi Boss/Sec function is related to parameter BSEC in KSCAC/KSEXI command. BSEC=1 mean Secretary and BSEC=2 mean Boss. SEC can be any type of extention, but Boss can only be DTS (that's an Ericsson stupidity) Then your boss is filtered by all secretary that belongs to Profil list 1 only. The...

Hi This is the purpose of EMS_EMGW system sold by Ericsson I don't think this could be possible without developping an application via CSTA Best regards

Hi Try to find something called "balun 75/120 ohms". I have found it on blackbox site http://www.blackbox.com/Catalog/Detail.aspx?cid=308,1559,1563&mid=4146

Hi Could you post the result of IODDP command? You can start with RFBOI:BPOS=1-0-52;

HI jaman2 What is this solution?

Hi Well, you have also the DISA option, but this will give you the PBX dialtone as soon as you dial the destination code of the route you wanted to reach. But mainly, Remote extension is made for that purpose.....

Hi Yes iot suppose to be like that according to SA 2004-02-24 - DBC 22x (Dialog 422x) system telephones in MD110 BC7 – BC10 systems availble in Knowledge base

Hi I guess that it is your digium box configuration that reply this message. You should make a trace on SLP60 on your PBX and analyse the result with STI (from SAM tool Box) to see why you get this message, or if the Digium box offer it (Patton does) see what are the incoming messages.