Conferencing

[Chamvari]

How can i achieve a 20 party conferencing on a Md110 Pbx

 

[dstrang1]

Install an external conferencing bridge, or set up an account with a 3rd party provider......the MD does not support a multiparty connection of that size.

Good luck,

Dave Strang

 

[jaman2]

We have solution for MD110/MXOne conferencing up to 30/60 participants. Soluition is integrated into magazine.

 

[fouesnant]

HI jaman2

What is this solution?

 

[cfrei]

try aerjot.pl

 

[whosrdaddy]

yeah, KKO board. it works but I have seen better solutions...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[jaman2]

Yes, KKO is right. Why is not enough ? is also possible to use 3rd party software - we have implemented with it - for dispatch application and for planing conferences via intranet portal.

 

[whosrdaddy]

I didn't say it's bad. we have some here too.

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[rfpup]

Hi whosrdaddy!

Let us know further possibilities about it.

Thank you

 

[LeeMason]

Have a look at Asterisk (

http://www.asterisk.org).

It Digium's Open Source IPPBX and has built-in conferencing which is excellent. You could connect it to the MD-110 using an ISDN (T1/E1) circuit or some analogue lines, or an H.323 trunk.


Lee Mason
Optimal Projects Ltd

http://www.opl.co.uk

http://www.backupsanywhere.com