TLU 76/3 CONFIG

[642234]

I have one E-1 link with one mobile compney. but when we receive call it is coming external. I confirmed from mobile compney there are sending called ID but we are not receiving there caller id. which parameter i should check in ROCAI AND IN RODAI . This is only incoming route. I have these parameters.

NOT GETTING CALLER ID. PLZ HELP



ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
9 7100000000000010 5 2100000001 0 30 128 00151515 111110000050 001100

END

<RODAP:ROU=9;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
9 TL30 H'00000070 H'00001232 NO

 

[whosrdaddy]

repost your RODAP/ROCAP and enclose them with tt monotags (see TGML help how to do this) this will not lose the spacing.

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[642234]

Dear Whosrdaddy,
Please help me i ave E-1 link with ZTE switch. I ma not getting caller ID. but they are sending caller ID. Plz help in this regards parameteds in ROCAI AND RODAI . SO THAT I SHOULD GET CALLER ID. I AM USING TLU76/3.
Please find ROCAP AND RODAP.
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
9 7100000000000010 5 2100000001 0 30 128 00151515 111110000050 001100

END

<RODAP:ROU=9;
ROUTE DATA
ROU TYPE VARC VARI FILTER
9 TL30 H'00000700 H'00002362 NO

 

[whosrdaddy]

you are not reading my answer, repost like this:

[ignore]
[tt]ROCAP and RODAP printout[/tt]
[/ignore]

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[whosrdaddy]

what application system do you have? (post CADAP

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[642234]

I donot understand tt .

CALENDAR DATA
IDENTITY=LOGBASE
VERSION=CXP1010101/2/BC12SP7/R4A
09:07:21
FRI 13 JUN 2008
END

 

[fouesnant]

Hi
below the windows where you are writting your post, there is some indication such as E-Mail Notification, Emoticoms/Smiley and Process TGML. Click on the Process TGML link and you will see some wonderfull feature that your present the printout of MD nicer to help you
there you can find the [ignore][tt] and [/tt][/ignore] explanation

 

[642234]

Dear,

Any body can help me in this problem. I have link through TLU76/3 with MFU board with ZTE switch and not receiving caller id on display. Please advise which parameters i should change in ROCAI OR RODAI

ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
9 7100000000000010 5 2100000001 0 30 128 00151515 111110000050 001100

END

<RODAP:ROU=9;
ROUTE DATA
ROU TYPE VARC VARI FILTER
9 TL30 H'00000700 H'00002362 NO

 

[Monrovia]

642234, unless you write the parameters correctly, under each tab, to read it is very difficult

ROU SEL              TRM SERV       NODG DIST DISL TRAF     SIG          BCAP
9   7100000000000010 5   2100000001  0   30   128  00151515 111110000050 001100

END
 
<RODAP:ROU=9;
ROUTE DATA
ROU   TYPE  VARC        VARI                FILTER  
9     TL30  H'00000700  H'00002362    NO

[tt]ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
9 7100000000000010 5 2100000001 0 30 128 00151515 111110000050 001100

END

<RODAP:ROU=9;
ROUTE DATA
ROU TYPE VARC VARI FILTER
9 TL30 H'00000700 H'00002362 NO [/tt]

put that data like this inside tt or code

 

[642234]

Dear,

Please sent me ROCAI and RODAI parameters for incoming route for TLU76/3 board with MFC signalling with ZTE switch. so that i should get caller ID. With existing parameter i am not receiving caller id on phone display.
i am using BC12SP7 version.

ROUTE DATA
ROU TYPE VARC VARI FILTER
9 TL30 H'00000700 H'00002362 NO

 

[fouesnant]

Hi 642234

We can't help you if you don't entre the data in a format readable for all
enter the printout of the system like this
[ignore][tt]MonoSpaced Text[/tt][/ignore]
The character [ignore][tt] and [/tt][/ignore]disapear if you press previous post or submit , BUT the big advantage is that we can see the printout you want us to see in the same dispaly as if it was the system.

 

[642234]

Dear All,

Please find ROCAPANDRODAP parameters and advise me

Thanks
ROCAP;
ROU=9,SEL=7100000000000010,SERV=2100000001,TRAF=00151515,SIG=111110000050,BCAP=001100;
RODAP;
ROU=9,VARC=00000700,VARI=00002362,VAR0=00001216,FILTER=NO;

 

[pcasi]

Try the following command an it may work

ROCAC:ROU=9,SERV=2100000011;

Regards