Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. rbohn1

    Cisco 3750 Switch & 1603 Phone Issues

    Thank you for the responses... At first we thought it may have been the Cisco switch ports, but we now believe we have a few bad 1603 phones, but more than likely bad 1603 power PoE adapters. I am in the process of RMA'ing, we'll see what happens with different hardware. This is the response...
  2. rbohn1

    Cisco 3750 Switch & 1603 Phone Issues

    thread940-1713195 Recent install with 90 9608 phones and 36 1603 phones. 9608 phones do not have the following problem. Problems are with the Cisco 3750 switch ports and the 1603 phones, the 9608 phones DON'T display this problem. Any suggestions would be appreciated...
  3. rbohn1

    Definity G3si to IP Office Conversion

    We are engaging with a client which has a 12+ year old Definity G3si system. They will have 90 Analog Stations and 210 Digital Stations. We are offering an IP Office solution. My question. Currently the phone closet has a series of 66 blocks with ampenol connectors at the side of the 66 block...
  4. rbohn1

    Automatic Paging

    If you are looking for a rather easy to use bell system which can integrate with a paging system look into this http://www.acrovista.com/bellcommander/
  5. rbohn1

    Cordless Phone Recommendation for Roving Receptionist

    The receptionist is a multi tasker who is roving around the office doing various tasks. An auto attendant is in place, but many people zero out for the receptionist. Currently the receptionist has a 3810 cordless digital phone. At times this works fine, however, the phone is getting old...
  6. rbohn1

    3810 Cordless Phone

    I believe the 3810 is supported by the Digital Card 8 and the Combo Card. You can find the 3810's on the interwebs. Have a few of these at customer sites, with no complaints.
  7. rbohn1

    Call Assistant Hot Key Dialing

    The one-X Portal's Call Assistant, supports hot key dialing. Meaning, I can find any phone number on a website, word, outlook, excel, document and I should be able to highlight the number, then hit a hot-key combination and the number will dial. Yes, this works, but without dialing a 9 or 9,1...
  8. rbohn1

    SoftPhone Error Message

    Got the SoftPhone working! The issue we had, on our internal network, and I am being general about this, we have a voice Vlan running the voice network over our data network. My engineer tells me, the SIP based Softphone is running on the data network, he had to point the data network...
  9. rbohn1

    IP Office 500 prefered edition softphone

    Which did you enter have to enter http:// or https:// to make the softphone work? I have entered http://ip address of phone system, and I am able to get past the login screen, (it logs my deskphone off, like it says it will), but I then get an error Account: Account 1 Could not be enabaled ???
  10. rbohn1

    SoftPhone Error Message

    Say, amriddle01, I saw your post in the other thread, instead of answering you in the other thread, I wanted to keep this SoftPhone issue in this thread, so if we find a solution, this thread might help others out as well. That being said, you indicated to add http:// in front of the IP...
  11. rbohn1

    CCR Supervisor Listen Question

    Sorry for posting here, but I am trying to get in contact with user Hcalix. In a previous post: thread940-1620958: Avaya Softphone Error He has experienced a Softphone error, where upon opening Softphone, one receives a message Account: Account 1 Could not be enabled. We are getting the same...
  12. rbohn1

    SoftPhone Error Message

    No, we do not use SIP Trunks, we have a PRI. I cannot see where I can contact the user of the previous thread, who had the same problem (Accounts Failed To Enable, etc.) and ask them if, or how, they resolved their issue.
  13. rbohn1

    SoftPhone Error Message

    thread940-1620958 I'm trying to install the Video SoftPhone, latest build on a 6.1 system and I am getting an error message, which was found in an earlier closed thread. Does anyone have any help with this? All installation steps have been followed. The Softphone seems to have a problem...

Part and Inventory Search

Back
Top