Search results for query: *

Try this: https://pbxbook.com/meridian/install/keycode.html http://pbxbook.com

Over simplified, but an easy way to think of it is the Call-Server handles DN to TN conversion, the Signalling server expands on this with TN to IP conversion. https://pbxbook.com/meridian/install/cs1karch.html

The CS1K needs IP sets and H323 trunk licenses. Here’s some SRG50 programming info: https://pbxbook.com/voip/srg50config.html https://pbxbook.com/voip/regi2004set.html https://pbxbook.com/voip/srg50cg.pdf http://pbxbook.com

Look over this: http://pbxbook.com/ipoffice/iposipnrs.html http://pbxbook.com

MikeyTen4, thanks for your kind comments, and I'm very glad you find the site so useful :) I'm also very glad you got your issue resolved! Also, show the virtual trunks status with: STAT VTRM <cust> <route> Have a great weekend. http://pbxbook.com

From the link you provided, print the RDB for Route 10 in LD 21. In the ISDN section, determine the DCH number. Got LD 96, and try RST DCH xx. Good luck! http://pbxbook.com

Telephonist, I've got some notes here, perhaps there's something useful: http://pbxbook.com/meridian/hardware/addipe.html As suggested, I would disable the Sys Mon TTY, and pull it. The power cables can be a bit tricky to get at, so make sure they're properly mated. Good luck. http://pbxbook.com

saaphoneguy, check the following settings in Element Manager: IP Network ➤ IP Telephony Nodes ➤ Personal Directories (PD) Check box next to Personal Directory Server: Enable Personal Directory (PD) service on this node. IP Network ➤ Personal Directories ➤ Server Configuration Enter the ELAN...

http://pbxbook.com/ipoffice/qsigcs1k.html phonetech2012, it works with CS1K set to ISGF, and the IPO QSIG-B. Names and caller ID then work both ways. http://pbxbook.com

There's a page on ZBD here: http://pbxbook.com/meridian/admin/zbdmanip.html Good luck figuring out, as KCFLHRC says, ZBD can get freaky. http://pbxbook.com

Check the following in Element Manager: IP Network > IP Telephony Nodes > Personal Directories (PD) Check box next to Personal Directory Server: Enable Personal Directory (PD) service on this node. IP Network > Personal Directories > Server Configuration Enter the ELAN Signaling Server IP...

Buddy, in my notes I have: With PuTTY, Softkeys 1 - 4 are Function Keys F1 to F4. Softkey 5 is Enter, and Help is Del on the Numeric Keypad. Softkey 1|Softkey 2|Softkey 3|Softkey 4|Softkey 5|Delete Field (-)|Help (.) Esc O P |Esc O Q |Esc O R |Esc O S |Esc O M |Esc O m |Esc O n...

baseparamsconfig should work for the SS's, though the MGC's (and possibly other stuff) will need changing too. It's not a simple task, especially on a working system... never break a working system!! lol. Perhaps there is some info you can use here...

Second post above, there's a link with instructions. Here it is again: http://pbxbook.com/meridian/admin/card_mov.html The trick is, you have to leave CUST blank, then it will work and do exactly what you want :) http://pbxbook.com

Have you tried moving it in LD 25? http://pbxbook.com

Open BCM Manager, and see what digits are being received from the CS1K during CCR navigation. http://pbxbook.com

Then we're in the wrong forum ;-) http://pbxbook.com

NMS enables message waiting lamps over tie trunks, its a CallPilot keycode option. The CS1K CallPilot should be able to take messages without it though, so you still have a local issue. http://pbxbook.com

Perhaps you unfortunately also need the Network Message Service (NMS) key code for CallPilot. http://pbxbook.com

EngMajdi82, I also think you're going to have to get rid of that 8 access code. Perhaps you can find a few ideas here: http://pbxbook.com/bcm/bcm_o11.html http://pbxbook.com