Which Licenses on CS1000 for SRG 50

[number1telecom]

Sorry for the lack of knowledge, I don't have much experience with the CS1000 side of things.

Have a customer with a CS1000 and has tasked me with getting them an SRG50 (which I have in stock) and whatever licenses are needed on the CS1000 to make it all work.

Can anyone help me with CS1000 part #'s etc needed to accomplish this?


Thank you

http://www.number1telecom.com

 

[Firebird Scrambler]

A customer I knew had SRG and here are the license details they had

Cartridge NT-Code : NTM410AFR15

New Installation Information Summary :
Security ID : 10334422
Aux ID : 10334422
Cabinet Type : Call Server/MAIN
Feature Set : EMEA Premium Network Services-L4 (ntm410lf)
Additional Pkgs : 190
Database : Pre-Configured database - EMEA Premium Network Servic
es-L4
CS 1000 CS 1000
S/W Release : 450W 450W
Licenses
TNS : 2500 2500
ACDN : 300 300
AST : 1 1
LTID : 0 0
RAN CON : 2 2
RAN RTE : 500 500
MUS CON : 30 30
BRAND : 2 2
ACD AGENTS : 108 108
ANALOGUE TELEPHONES : 16 16
ATTENDANT CONSOLES : 2500 2500
BRI DSL : 150 150
CLASS TELEPHONES : 0 0
DATA PORTS : 2500 2500
DIGITAL TELEPHONES : 24 24
IP USERS : 208 224
BASIC IP USERS : 0 0
PHANTOM PORTS : 2500 2500
DECT USERS : 0 0
DECT VISITOR USERS : 0 0
ITG ISDN TRUNKS : 0 0
TRADITIONAL TRUNKS : 2500 2500
TMDI D-CHANNELS : 64 64
SURVIVABILITY : 1 1
PCA : 0 0
H.323 ACCESS PORTS : 30 30
SIP Access Ports : 0 0
SIP CONVERGED DESKTOPS : 0 0
SIP CTI TR87 : 0 0

M3900 Language Set : 1. Global 10 languages

The CS1000 will need to have some VOIP trunks which I recall were H323.

From what I remember, the programming was fairly straight forward and a typical IP phone was programmed as..

DES BRISTL
TN 061 0 00 02 VIRTUAL
TYPE I2002
CDEN 8D
CUST 0
ZONE 010
FDN
TGAR 1
LDN NO
NCOS 0
SGRP 0
RNPG 0
SCI 0
SSU
XLST
SCPW
SFLT NO
CAC_MFC 0
CLS TLD FBD WTA LPR MTD FND HTD TDD HFD CRPD
MWD LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LND CNDD
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD MCTD CLBD AUTU
GPUD DPUD DNDD CFXD ARHD FITD CLTD ASCD
ABDD CFHD FICD NAID BUZZ AGRD MOAD
UDI RCC HBTD AHD IPND DDGA NAMA MIND PRSD NRWD NRCD NROD
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
FDSD NOVD VOLA VOUD CDMR ICRD KEM2
CPND_LANG ENG
HUNT
PLEV 00
CSDN
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 3769 0 MARP
CPND
CPND_LANG ROMAN
NAME Frank Thompson
XPLN 27
DISPLAY_FMT FIRST,LAST
01 ADL 16
02 ADL 16
03 ADL 16
04
05
06
07
08
09
10
11
12
13
14
15
16
17 TRN
18 AO6
19 CFW 16 3765
20 RGA
21 PRK
22 RNP
23
24 PRS
25 CHG
26 CPN
27
28
29
30
31
DATE 17 SEP 2012

The important part is the zone number as it was a different one per SRG site location.

The call routing was complex in that it was tagged against the zone number.

The trunks were..

TYPE TLST
TKTP TIE
ROUT 69
DES H323
TN 069 0 00 00 MBER 1 H323
TN 069 0 00 01 MBER 2 H323
TN 069 0 00 02 MBER 3 H323
TN 069 0 00 03 MBER 4 H323
TN 069 0 00 04 MBER 5 H323
TN 069 0 00 05 MBER 6 H323
TN 069 0 00 06 MBER 7 H323
TN 069 0 00 07 MBER 8 H323
TN 069 0 00 08 MBER 9 H323
TN 069 0 00 09 MBER 10 H323
TN 069 0 00 10 MBER 11 H323
TN 069 0 00 11 MBER 12 H323
TN 069 0 00 12 MBER 13 H323
TN 069 0 00 13 MBER 14 H323
TN 069 0 00 14 MBER 15 H323
TN 069 0 00 15 MBER 16 H323
TN 069 0 00 16 MBER 17 H323
TN 069 0 00 17 MBER 18 H323
TN 069 0 00 18 MBER 19 H323
TN 069 0 00 19 MBER 20 H323
TN 069 0 00 20 MBER 21 H323
TN 069 0 00 21 MBER 22 H323
TN 069 0 00 22 MBER 23 H323
TN 069 0 00 23 MBER 24 H323
TN 069 0 00 24 MBER 25 H323
TN 069 0 00 25 MBER 26 H323
TN 069 0 00 26 MBER 27 H323
TN 069 0 00 27 MBER 28 H323
TN 069 0 00 28 MBER 29 H323
TN 069 0 00 29 MBER 30 H323

The most important thing to remember which was always a major problem was the mismatch with the IP firmware. We had to be sure that any replacement IP phones had the right firmware. The best answer is to get both systems to have the same firmware installed and not to change it unless you do both at the same time.

You are aware that some of us know how to update the BCM firmware, so this shouldn't be a problem.

All SRG does is in effect to have IP phones from the BCM be registered to the CS1000 system when working correctly and any calls coming into the BCM are passed straight over the VOIP link into the CS1000 first before going to the phones wherever they might be deployed such as via ACD etc.

If the VOIP link fails, then the BCM becomes a stand alone system and all BCM IP phones become local extensions and the calls pass over to them until the link is restored.

Registering the phones is a little different in that I think we used port 7300 and it took a few minutes to complete as two firmware downloads are done. one via the BCM and the other via the CS1000. That was why you need to have the right firmware installed.

I have more information if you require it.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin

 

[number1telecom]

Okay. Thank you, David.

I will contact you if I require additional information.

http://www.number1telecom.com

 

[mikepbx1]

The CS1K needs IP sets and H323 trunk licenses.
Here’s some SRG50 programming info:

https://pbxbook.com/voip/srg50config.html

https://pbxbook.com/voip/regi2004set.html

https://pbxbook.com/voip/srg50cg.pdf

http://pbxbook.com