Search results for query: *

NEC call their trace utility "InCapture" which can be found in WebPro with an installer level login. I'd suspect that the invite from the ITSP does not match any configured account number/DID number within the P X settings.

NEC should be asked to provide a final license free edition for all products like Panasonic did when they withdrew from the market. It's the least the could do for our continued custom. //Andrew

Thanks for the info. //Andrew

saloptelecom at gmail dot com Thanks //Andrew

Hi, Does anyone out there have a manual that details the CLI Commands that one can use with an iPECS. Thanks //Andrew

Sounds like you were using port forwards off the public IP Address, which would have changed with the ADSL provider change. If you are using VPN's then the following settings apply Go to System & Device IP (PGM 102~103)and establish what the sequence number of your remote phone is. While you...

It is possible to playback your .wav files via the external MOH Socket. If you have noise problems with this method, try running your laptop on battery power only, as sometimes noise can be induced from the mains electrical supply. //Andrew

The batteries of older systems do run down after time. The problem has been cured on the newer build systems. To permanently fix the problem, a replacement battery with a diode fitted in series needs to be fitted. This battery can be sourced from the national distributor of the LG product in...

Hi Steve Thanks for your reply. I have already tried that, but without success. Phontage still installs as basic. Andrew //Andrew

I am attempting to install Phontage ver 5.1Ad onto a PC running Windows 7 Professional. The PC has never had a Phontage installation before. I am selecting the deluxe option as I wish to use the complementary licences available on the iPECS. No matter what I try, the installation always...

Jezt You need to log into the Admin Section to use PGM 171. Dial Trans/PGM *# (Password if set) Trans/PGM Then proceed with Steves instruction ie PGM 171 Flex Button 3 - set to off //Andrew

Hi Guys, Has anyone managed to get Sipgate SIP Trunks working on either an ipLDK or an iPECS? If anyone has, please tell me how you managed it. Thanking you //Andrew

I have had similer problems in the past. The cause was determined to be interference on the floor cabling. When we replaced with a better quality cable, the issue was resolved. Good Luck //Andrew

Hi, Does anyone know if it is possible to install the LG-Nortel TSP on a server, and integrate MS Outlook directly to the TAPI application on the server? Andrew //Andrew

Has anyone managed to get the Speed Editor Application to connect remotely? I have forwaded UDP 6000 to the LANU Card, but without success. Any idea's? Thanks

Does your ADSL Router have it's own SIP capibility? If so, make sure that any reference to port 5060 on the router is removed, and the SIP ports shut down.

Hi, sorry for the late reply. I am specifically after the english file for the ipLDK-20 VMIBE. Thanks Andrew.

Does anyone have the language files mentioned in this thread? I would like copies of any of the languages available. Thanking you in advance - Andrew