Recordings to VMIB through a cable...

[doktor]

A very good hint if your VMIB or other wav file recordings suffer from noise or if you do not want to bring the speaker out to the actual site, where the LG PBX is located.
Make a cable with an RJ11 is in the one end and attach that end to the LG keyset system phone.
In the other end solder a mini jack with the cord containing the "handsets speaker" (in some cases pair one, others pair two) to the mini jack plug.
Now you can login to the VMIB and start recoding your wav files directly from your PC to the VMIB.
These recording can be made now in a proffesional recording studio - in a very good quality.

///doktor

 

[ipLDKInstaller]

It is possible to playback your .wav files via the external MOH Socket.

If you have noise problems with this method, try running your laptop on battery power only, as sometimes noise can be induced from the mains electrical supply.

//Andrew

 

[doktor]

Yes, you're right - especially on the second "point"

///doktor

 

[PABXtech11]

There is a way to get much better sound quality and its easier. Set pgm 171 to external and When you go to record your prompt eg 001 press * before the # key and it will record through the external MOH port which u can plug any music source into, laptop, mp3 etc.