Search results for query: *

Thanks for the reply. We have a few systems working with Telstra Sip Connect to the Mitel. It was Tetra that i was looking for, which is a Motortrbo handset (radio) solution. I can connect to normal radio using a Teldio Solution from Mitel, but wanted to do sip connect to Tetra, which is not...

Hi all Has anyone had any joy connecting a Mitel directly to a Tetra network using SIP. Tetra is not available in Canada, but in Europe and over here in Australia it is all good. Seems to work with Cisco (alledgedly) :)

The only time that i have seen this and not on a virtual machine, is when in the ARS digits dialled you have 0 as the only route with unknown to follow i.e. a blanket all allowed ARS. As soon as we added proper ARS we could add the secondary dial tone.

Cheers gents. I will look at how DHCP is set. I am sure it is 125 and both the call server and tftp server are set to the src address. I will double check though...

Thanks guys. This site did not originally have an SRC server and ran fine for a year or so. It's only since SRC went in that we get the problem with delay. It's intermittent as well. SRC, 3300 and Phones all on the voice vlan. Early release 9 on the 3300, and 2.2 on the SRC. I have just...

Hi all Has anybody experienced this issue. We have a Mitel 3300 running 9.0, with SRC 2.2. When the calls are passed through to the sets, there is a delay at the beginning of the call, which can be up to 30 seconds, of no audio. if we put the call on hold and retrieve it, then there is a...

Add the IP Address of the 3300 to your trusted sites in Internet Explorer....

Has anybody seen these logs in the 3300 recently. Seem to be appearing every 5 minutes or so: APPSL-SBAVSS getNextMobileDnToBeLoaded>Dn does not exist.

I have seen this plenty of times. Is this not the problem, where you just need to add the IP Address of your 3300 into your trusted sites in IE.....

I have experienced this in the past. Is the Exchange Server running in a VMWARE Environment. If so, it has two many processors/resources allocated to it. Just assign one processor and minimum RAM to the VMWare instance.

Hey MitelGuy Seems the Siemens guys are just attempting to say that the Mitel is at fault, and is not responding to my enquiries. I will attempt to get some more info from them.....

The EMS/NMS Service is the database piece of the install. When you licensed the server, did you have an error after you had communicated with the AMC stating something like "the service will not start". Seem to remember that when you license the server and the licences download successfully, you...

Are you installing the software via remote desktop? If so, then then vnc or directly on the server . Uninstall and reinstall the software first... Good luck...

Thanks Guys Siemens are about 2 kms away connected over a DSL connection on the same subnet. Whenever i talk to them, they state that"We do not do authentication". How do we turn it off on the Mitel, so that we never try to authenticate and the link always stays up? Appreciate your help ..

Hey all, Has anybody successfully connected directly to a Siemens HIPATH from a Mitel 3300 using SIP. Nothing in the SIP interoperability on MOL. Have always connected using QSIG in the past, but the Siemens guys here in Australia are convinced that SIP will work. If i call from a Siemens set...