Search results for query: *

I need to receive atleast 4 digits to disambiguate between recieved numbers (I receive numbers ending in 9200 as well as 1200). I can't receive 4 digits because of the 9XXX numbers. I can't change my DID range; the numbers are published. I will not change the access code because everyone is...

I have a Norstat MICS with a PRI. Currently, the teleco is sending 5 DNI digits and the Norstar is programmed to recieve 5 digits. Some new numbers that are being ported to my PRI end in 9XXXX. Becuase 9 is my outdial code, I can't program the switch to handle DNI numbers beginning with 9. I...

If I install a BRI card in the MICS and a BRI fax board in my server, can I send calls that come in via my PRI from the telco to my fax board via the BRI card and pass along DNI information?

I have an MICS currently equiped with 2 CLID cards. I will be switching from POTS service to PRI. I have an analog fax board that is capable of receiving DTMF tones and routing faxes based on these tones. Can my MICS send calls received via PRI made to a specific block of numbers (say...

I've written an program to copy contact infromation from a database to an exchange public folder using CDOEX. See: http://support.microsoft.com/default.aspx?id=310199 If I open the public folder in Outlook, I can see all the contacts that have been added from the database. I have set the...

PScottC - thanks for your post...I followed the suggestion in the thread you referenced and my problem was fixed.

I'm running MS Exchange 2003 on a Win 2K3 box. All of my outgoing mail is delivered successfully accept messages sent to recipients @yahoo.com. When I look at the server queues in the system manager, I can see one for SMTP mail to yahoo.com. When this queue is selected, the Additional...

I am running exchange server 2003 and I use ACT! 2005 premium which stores contact information in a SQL Server 2000 database. Is there any way for my users to access the e-mail addresses of the contacts stored in SQL server(possibly via an exchange address list). I don't want the integration...

sicktrick: which machine do I need to do this on? The exchange server, the domain controller, or the client machine? wdoellefeld: I checked that. The user isn't hidden. I even tried making the user hidden, applying the setting, and then unchecking the option. No difference. Thanks

I just installed MS Exchange Server 2003 in a Windows 2003 Active Directory environment. When I create a new user with a mailbox in the active directory, everything works just fine. When I create a mailbox for an existing user, the user cannot connect to the exchange server from Outlook...

I found the culprit... looks like these lines were causing my problem: access-list inside permit ip 192.168.0.0 255.255.0.0 192.168.0.0 255.255.0.0 access-list inside permit tcp 192.168.0.0 255.255.255.0 192.168.6.0 255.255.255.0

...10 set transform-set dynvpn crypto map remote 5 ipsec-isakmp dynamic DYN_MAP crypto map remote interface outside isakmp enable outside isakmp key ******** address 0.0.0.0 netmask 0.0.0.0 isakmp identity address isakmp policy 10 authentication pre-share isakmp policy 10 encryption des isakmp...

Thanks, tbissett!

Thanks lgarner

I would like to configure a crypto map in which the peer is specified by a domain name. This is the command I try: crypto map outsidemap 20 set peer XXXXXXX.XXXXX.org this is the error returned: ERROR: address <XXXXXXX.XXXXX.org> is invalid Is it possible to accomplish this. If so, what do I...

I have a PIX 515E and have a site-to-site VPN configured and working. This VPN terminates at a watchguard soho 6 router which has a dynamic ip address. My VPN uses a pre-shared key and a dynamic crypto-map to accomodate the SOHO's dynamic ip. I would like to be able to connect to the network...

luv2ski, I created a mailbox for DN 21 and configured that set to forward to DN 34 (startalk) after 2 rings. When I place an intercom call to set 21, this works - after 2 rings, I get voicemail. When I call from an outside line, set 21 rings twice then stops ringing, but all the other sets...

luv2ksi, what DN should my DRT be set for, or should it be set to none?

I have a 616 DR5 DS with a StarTalk Flash. When the auto attendant answers a call I would like it to play a message and then immediately transfer to the general delivery mailbox without any caller input. Is there a way to accomplish this?

I am trying to configure my PIX 515 to authenticate via my W2K3 IAS server using radius. On the IAS, I have configured the PIX as a client and have created an access policy with based on group membership. The profile of this policy has only the "unencrypted authentication" option selected and...