Search results for query: *

In this scenario there are 2 separate risks that (arguably) warrant mitigation: 1) bad stuff e.g. virus that comes through with the [encrypted] vpn payload; and 2) anything else that might be trying to compromise the external interface of the contivity (syndos, cleartext, etc.). You cannot do...

I think it's fair to say that DLink does not produce what are generally considered to be Enterprise Class (i.e. 'commercial') routers. That said, your router model 'should' work just fine for 7 users/connections, indeed for many more than that - DLink certainly thinks so...

I'm assuming you are all using nortel vpn client v5.01 or above? The eacfilt 'driver' is a component of the nortel client software. Does the VPN connection work using any of the other network (i.e. wired LAN or dialup) interfaces on the PC? To see if the configuration 'looks' like it should...

I don't believe the Nortel can be programmed in the admin interface to distinguish/filter secondary+ connection attempts from specific remote WAN IP. It can do a filter based upon the username/password supplied at login but I doubt that's the issue, here. What router are you using at the...

First, just some basic stuff: Did you powercycle linksys? Before next, go into linksys router management interface and then to (approx) Security > VPN and validate that the radio button for Enable IPSec is selected. If not, this is issue. Click button, then save below. Assuming that's good...

Windows XP has it's own vpn software client 'built in', so it sounds like you should be all set.

Did you register RRAS for the win xp vpn server in your local Active Directory ? I don't believe this would affect your LAN based (successful) attempts. See: http://support.microsoft.com/default.aspx?scid=kb;EN-US;q314485

To clarify, I'm assuming the scenario is: remote client connects using VPN to XYZ network (i.e. where the VPN concentrator is located). Client then sends print jobs to appliance at XYZ successful, but no internet. Flip the checkbox and situation reverses. Correct ? How is client connecting...

Though you have probably already done so, i would first check the management interface of the befsr41 and validate that both PPTP and L2TP passthrough are enabled (on my model it's at: Security > VPN). If it's an older version of firmware those selections might have come set to diabled by...