Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Wythefan

  1. Wythefan

    Fishing for Mitel 3000 info

    The Mitel 3000 was brought over from Inter-Tel world and personally I don't see why they didn't revamp the whole system. I can't see changing out any perfectly good 2 wire system to go back 30 years to a 4 wire analog. We are in limbo here where I work trying to find a CICS/MICS replacement...
  2. Wythefan

    Fishing for Mitel 3000 info

    yes you may Norstar phones with the Citel/Mitel Gateway...only seen it once and that was at Atlanta's Mitel Lab. Only time I have even come close to quoting one was when a 2 private schools wanted to be tied together...one had a MICS with new 7316 phones...ended up buying the phones and sold...
  3. Wythefan

    Fishing for Mitel 3000 info

    SX Wizard....He is asking about the Mitel 3000 key system that was adopted from the Inter-tel line. Not the 3300
  4. Wythefan

    Fishing for Mitel 3000 info

    Don't get me wrong...I love the little 3000. Be aware the 3000 phones are 4 wire phones....yes 4 wire...if you replace a CICS/MICS you will have to crack open every jack and rewire...redo all jumpers....change out every baseboard cord that isn't 4 wire. I have some customers that have cubicles...
  5. Wythefan

    Large Log Files on 3300?

    Below is what I tried....however the the command is not valid when i type it as a Maintenance Command. Should it be done in the Shell Console? To disable SASTATS collection Enter DEBUG DISABLE SASTATS in the Maintenance Commands form.
  6. Wythefan

    Caller ID through Auto-attendant

    Try....Display Held Call ID on Transfer....set to yes....on your VM port COS.
  7. Wythefan

    Large Log Files on 3300?

    I have a trouble ticket with Mitel for an unrelated problem in which they told me to send them system log files....to my amazement they were 29 Meg(had to send via FTP)....most times they are 7 meg Tech support said I probably had some type of debug turned on....he wouldn't tell me what it...
  8. Wythefan

    UC Advanced Client 3.0 goes offline

    I reinstalled just the blade and it has worked ever since.
  9. Wythefan

    UC 3.0 welcome message?

    Does anyone know if there is a log file that will show errors sending the Welcome Message? I have looked at everything that resembles smtp in log files with no luck...my gosh there are bunch of log files. I have email settings for each account...email settings for server. Just want to see why...
  10. Wythefan

    UC Advanced Client 3.0 goes offline

    I have setup UC advanced 3.0.21.0. When I start the UC Advanced 3.0 Client it will work for about 25 to 30 seconds then it goes offline. It will connect and work again if I exit then restart....but only for 25 to 30 seconds. Any help would be appreciated.
  11. Wythefan

    5485 IP Paging Unit

    amps? What do you mean? Valcom speakers are self-amplified. Do you mean page controllers? VP-2001 maybe. Mitel IP Page Units provide audio and thats all you need for Valcom.
  12. Wythefan

    Monitoring D Channel on Embedded PRI 3300?

    Yes....Unknown numbering was it. Changed it in the protocal assignment. I was an NI2 North American. Thanks Bunches
  13. Wythefan

    Monitoring D Channel on Embedded PRI 3300?

    My Long Distance calls aren't going through on a PRI...I am getting reorder at the Central Office like the correct digits are NOT being delivered....ive set up SMDR and watched the correct digits being delivered out...just looking for another avenue to watch the digits hit the d channel and on...
  14. Wythefan

    Monitoring D Channel on Embedded PRI 3300?

    Can someone help me. I need to monitor the D Channel on Embedded T1/E1 on 3300 MCD 4.0 SP2. Does anyone know the commands?
  15. Wythefan

    Creating a Music wav for 3300?

    I have a MP3 that I have converted to a WAV....now I need to change to 8hz,8 bit Mono...Alaw/Ulaw. I have tried windows sound recorder but the 3300 rejects. Any advice. Tried about everything I know to do.

Part and Inventory Search

Back
Top