Recent content by pingram3541

I know right, I had similar concerns especially when i saw that the PRI was configured as a standard T1 I was sure I read somewhere that it would not work unless PRI but maybe the spec is the hardware because it is a PRI card in the cabinet config (confirmed photo). Oh well, I'm not gonna...

Ok, yay I got the s/w and I'm connected. Here's what I did. 1) I created a new portable station (unregistered of course) and set COS 1 (has CO fwd enabled) and set CF ALL w/ 9+1+AC+Number 2) I set DID DAY/NIGHT etc to new portable station number Works like a charm! -Phil Ingram...

Thanks for the info and you are correct it does not have a D at the end, that was a typo and I've corrected the original post =) I have VARs I work with that are dealers, I can get the s/w thanks for confirming I DO need the US version. -Phil Ingram http://www.tellatek.com/ - VOICE | DATA | DESIGN

I think the issue is not having the US version of the MC s/w. It now reports an error when connecting "program not installed correctly" so I know the default password and USB drivers are good. If I choose the wrong system or try a different password I get a completely different error so at...

Thanks for the great info. One thing that seems to be of insider knowledge is during the s/w installation it asks for a suffix code, i.e. KXTDA100XX where XX is AG, BR, CE...etc. I couldn't find anything in the manuals nor photos the client sent me. How important is this for the s/w to work...

It's been years since I touched a KX but I've been a phone tech for 25+ years and I know my way around just about every major manufacturer out there (NEC, Avaya, Toshiba, Nortel...) and I've been tasked with programming some temporary call forwarding while my client waits for some numbers to be...

Good suggestion MercuryComm, it had crossed my mind that a bad hook switch could result in the off hook alert but in this scenario it's clearly the speakerphone mode that is active which puzzled me because this can't be actived from another station via voice over or paging, etc. The only things...

Maybe...just maybe...the cleaning lady sneaks in and places a call to Guatemala to talk to her distant cousin who only has 4 fingers on his left hand, but that's a different story. She does this every morning, like ritual. Oh yeah, and also sits back in the leather lounge chair with her feet...

ah, I misunderstood. I have worked with a lot of systems and I don't recall one in which you can place a conference call on hold that someone else can pick up when using the systems built in conference feature, however... When using a carriers conference function the system sees you as only...

Ok, just remember that if you can get the carrier tech to try dialing a 418 number from the circuit DMARC using a tester and they have the same ringback issue, they should be obligated to figure out what the problem is. -Phil Ingram http://www.tell-a-tek.com/ {All-You-Can-Eat Telecom and IT Buffet}

LOL! yep. that's got to be the problem! -Phil Ingram http://www.tell-a-tek.com/ {All-You-Can-Eat Telecom and IT Buffet}

The Aspire is much like the IPKII I have been told. I believe the IPKII was developed from the Aspire. I don't have first-hand Aspire experience but I have much on the IPKII. Via the web admin you should be able to go through the caller-id wizard to verify that "caller-id through" mode is...

Ok, let's look at what we have narrowed down. 1 - The issue does not happen on other trunk card/types in the same phone system - i.e. 4COT card w/ analog pots line 2 - The problem only happens to certain LD numbers, not all, but the same results with those numbers 3 - The problem only happens...

You need to change the restriction level to that of another phone that is un/less restricted. see cmd 1201>XXXX>YZ where XXXX is the extension number and Y is the Day restriction level 0-7 and Z is the night restriction level 0-7 typically 0 allows everything and 7 allows only internal...

The numbering plan lookup is backwards... try 200>9:??? if it is A126-A129 you are using LCR tables. Then test using direct trunk access. You can assign a direct access code... 200>A110:110 (110 = route 10) (where the access code is *110 to access route 10 or whatever your PRI route is)...