Recent content by Lodde

Have u checked the Licensing page in the Avaya IP Dect Mobility Manager ? Becuase if I remember correct, calls will be disconnected when having Licensing issues.

Hi I am not so sure about this, my experience with alog trunks was many years ago and not on Avaya systems. But I have a feeling that by adjusting the Ring Persistency could make a difference. So have you tried to increase the setting from default ? Do note that if you increase it to much, it...

I have also had a customer complaining about this after upgrade to 9.1.5

OK, I was almost sure that R9 licenses did not work on older SW´s. But maybe that was older SW´s then 8.1 ?

My opinion is that an R9 IP endpoint license will not work in a 8.1 system. These will work in an 8.1 system: 229444 229445 229447 These will not work in an 8.1 system: 275618 275619 275620 But all the above partcodes will work in a 9.x system.

Avaya could have made it clearer, they have it documented in Product Description that Collective groups are not supported, but they do not mention it in any installation manual :-(...

Sorry, I have now used Google and found the answer :-)

tlpeter - can you pls explain a little bit more about the Source Number mentioned ? Like what it does and why ? Regards Lodde

One point of the "Drop" key is when you are a member of a group and receives an incoming group call, the call will be pushed to next member if pressing "Drop" (if the group is not Collective)

Hi See this thread: thread940-1707298

You are most likely offline :-)

SC = shortcode

I now understand what you mean and I have tested it on our system and I can also verify that the feature RCall is not working if the feature is assigned to a button. The feature works if you just choose the Feature button and then scroll to the RCall feature and use it that way. But that is not...

Yes, I understand your issue and I state that I do not have that issue with my setup. But I know that I had the issue on a site where they had SC under the User for outgoing calls and that affected this issue, when they removed the SC´s on the Users, the CLI with Twinning was OK even with...

Had it not working on a customer site before and the problem was that they dialled out using User SC and not System SC. / Lodde