Recent content by GoldenGirls

They had a recall on BFT and MSC in the older Bcms

phoneguy427 is wright on system password, you can see it,or change there...

Silver987 is right the door phone and opener works great together,i have some installed in a jail works great,But you are limited to 5 on a system....Dont know about vikings ithought they were a football team????

Maybe the router is giving his pc the address.Do you have a network programer on your pc,They work good,just place your ip address range and enter it and you will see all pc's

Also dont forget cell numbers...I have done the same thing it works fine like posted above...

How can i fine out what firmware version is on my ip phones.

There is no place on cab, Just lines,Lighting modules they work to a point..

Can you change.

You may a bad BFT OR MSC card they had some out there.You can back up ot your e drive on the bcm. If you replace the bft and the msc you just need the tele back up and you can do this to the e driv fast and easy

Have you tryed to connect to the serial port tele net in or with procom works great

What are you running

Could you go to maint and look at dn look up 23 to see if and what it goes to..

ACE and JUSTATECH are right start at that number given let the wizard set it up then go back and change the dns,Thats why i always number my blocks with the port numbers,Just in case of a set relocation is on or you change dns,It works but a pain....

There is a place in the BCM for door phane are you using that

Long as the system seems to have corrupt data i would place all mods in right place and then power up ini the unit and start over,sounds like a pain but once the currupt is there thats the only way to rid your self if this...