After much ado I've gotten my Win98 install up to the point of the logo-which froze, so I set the logo to 0 in the msdos.sys file. Now I see the reason of the freeze which is 'program cannot be run in dos'. Now how do I find out what program this is that is trying to run? This is an older Gateway pc.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Windows98 Freezes on New Startup
- Thread starter plock
- Start date
Can you give some more details please? Like, have you done a new clean install of Win98 or have you been working with existing installation after a problem - and if so what symptoms did you get when problem started? Also, brief description of your PCs hardware & software.
PS. Have you tried running Win98 in step-by-step mode - keep pressing F8 or Ctrl key before it starts loading & you should get menu (includes safe mode). One option is step-by-step. If you answer yes to each 'should I load' question, note where load freezes. Repeat, and ansswer no at that point next time - see if it now loads o or repeat till it does.
PS. Have you tried running Win98 in step-by-step mode - keep pressing F8 or Ctrl key before it starts loading & you should get menu (includes safe mode). One option is step-by-step. If you answer yes to each 'should I load' question, note where load freezes. Repeat, and ansswer no at that point next time - see if it now loads o or repeat till it does.
- Thread starter
- #3
This is a fresh install of windows98 after I did a format of the 2gig drive. I've had probs all along the way-this being my first time didn't help. At first I had a problem loading the cd drivers - found a bootdisk for tosh online; then got err msg saying to give path of command.com-so i found how to set path to dos; now its taken several tries to install win98 from cd-it kept freezing at diff points, sometimes at 13%, then at logo. I found how to add line to the msdos.sys to stop logo from displaying and found that its freezing because it appears to be trying to run some program in dos: this is the msg on the screen-listed 4 times. This is a far as I can get on a hard drive/normal bootup. To get a boot to the c prompt I have to use the start up disk, which I do, then switch to c:\w98flat where I copied all of the setup files from the cd [win98 folder] and I ran 'setup' several times - As I said, it would get to a poiint then hang/freeze. Seems all files have been copied, etc and it is now stuck at 'starting windows for the first time' -
- Thread starter
- #5
Yes, Win98 was previously installed. I decided -and was told by friends- that a total cleaning of the hard drive would be good since the 'young' person who'd had the pc before it was given to me had simply deleted parts of unwanted programs instead of properly removing them and the only program working properly was Outlook express.
- Status
Similar threads
- Locked
- Question