NEC DT700 STANDARD SIP FIRMWARE 14

[axlicio]

Good afternoon.

I have some NEC DT700 equipment and according to what I was reading, the firmware could be changed so that they are compatible with Asterisk, can someone pass me the firmware and the NEC Ip programming tool? Thank you very much

 

[Umberto_Etil]

Thanks belevedere for your quick action and support.
Having gone through the document for upgrade instructions, it seems that Sip@net or 3C is required.
Is there any other way around?

 

[belevedere]

The UC3 system uses STD SIP phones. Not all are supported by NEC. The system converts NEC SIP phones to STD SIP when connected properly.

 

[jschoonmaker]

Belevedere - i found an older closed thread that i couldnt reply to. Im looking for the firmware for the DT900 phones to STD SIP. The great state of Alaska has invested millions in NEC Systems and equipment and are devasted by the latest news... but id like to keep using the phones in varies ways

if at all possible can you send me software, firmware or link to get it at jschoonmaker@alcantel.com or databoy56@hotmail.com

Thanks

 

[belevedere]

done.

 

[Saeidnec]

Hello, I would like to switch from Standard SIP to the original NEC SIP firmware. Where can I download?
dt700 itl 12 d 1p
reg to nec sl1000

Thanks
my mail:
novinpbx@gmail.com

 

[Saeidnec]

Hello, I would like to switch from Standard SIP to the original NEC SIP firmware. Where can I download?
dt700 itl 12 d 1p
reg to nec sl1000

Thanks
my mail:
novinpbx@gmail.com