First off, thank you for the firmware. I wanted to post my steps in case anyone else is a little confused on how to flash the phone. I've also run into a problem though which I go into at the end.
I ran pumpkin on my computer. it listens on udp 69. i disabled my firewall just to make sure it wasn't in the way.
I browsed to the web interface on the phone, went into Maintenance Settings, Download Menu, Download Files, Boot & Program.
Changed the protocol to TFTP. Put in the ip address of my computer. Left Folder blank.
The filename got me at first. In the browser it was looking for itlisipv.tgz and would error out with file not found. The file in the zipped firmware is named itlissipv.tgz, an extra S in there.
Once I changed the filename in the browser to itlissipv.tgz it downloaded. The phone rebooted and starts up like normal. Initializing... Starting... then a new screen that says Waiting for LLDP... then after a bit another new screen that says DHCP Complete.
At this point I can ping the phone but there is no web gui.
The only option on the phone itself is an Exit button. Pressing it reboots the phone.
I tried hold, transfer, *, # but it doesn't bring up a login. The screen lights up but doesn't go anywhere.
So then I noticed the menu button on the phone for the first time ever. I press it and a menu comes up. I go into admin settings, sip settings, line 1.
I put in 106 as the account name, i skip the display name for now, for Registar I put in the ip address of my FreePBX server and 5060 as the port. As I exit the menus it asks to save and reboot which I do.
But the phone never registers with FreePBX. I've double checked the settings and the ip address and port are correct. Other phones and soft phones are working fine.
I even tried to put the FreePBX server in the outbound proxy settings but it still will not register with FreePBX.
FreePBX can ping the phone. Not sure what else to try.
Any suggestions?
