Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mitel 3300 MXe - Sheduled operations

Status
Not open for further replies.

LuanCarli

Technical User
Jul 30, 2007
30
IT
Hi to everyone,
Is there a way to schedule a repetitive csv import operation, for short numbers and phonebook?

Thank you

Luan
 
What is mcd 5? Is it the version of the system?
 
Version of the SW.

There was a serious revamp at Release 10 that became MCD 4

MCD 5 is the equivelent of release 11.

**********************************************
What's most important is that you realise ... There is no spoon.
 
This is the result of the show version, i cannot figure how to understand what release or MCD is. Can you help me?


>>>> VERSION of Saved Software <<<<
3300 ICP Call Control 39.0.3.15

MC Complex S/W & Data
---------------------
Main Controller -------: MAINIP3K 39.0.3.15 Wed 17-Jun-2009 20:05
MC Initialization -----: SXIP3KINIT 39.0.3.15 Wed 17-Jun-2009 17:29
Country Tone Plans ----: COUNTRYTS 39.0.3.15 Wed 17-Jun-2009 15:19
Package Master Data ---: PKGMASTER 39.0.3.15 Wed 17-Jun-2009 17:25 si

PC Complex S/W & Data
---------------------
Peripheral Controller -: PER 39.0.3.15 Wed 17-Jun-2009 16:20 si
Country Dependent Data : PERDAT 39.0.3.15 Wed 17-Jun-2009 17:23 si
Digital Set Data ------: DNICDEE 39.0.3.15 Wed 17-Jun-2009 17:19 si
DSP DTMF --------------: DSPDTMF.F02 13-Sep-2002 11:53 f02/dspdtmfa
DSP FSK ---------------: DSPFSK.C05 06-Sep-2002 11:39 c05/dspfska

Line Card S/W
-------------
DNI Line --------------: DNICLC 39.0.3.15 Wed 17-Jun-2009 16:22 si

DSU S/W
-------
Conference ------------: CON.F01 01-FEB-1986 11:03 [SX.CON.F01]CON
CEPT MSDN/DPNSS -------: CEPTDPNSS.J01 07-May-2001 19:52 j01/ceptdpnss
CEPT CAS --------------: CEPTCAS.G01 07-May-2001 19:52 g01/ceptcas
DS1 MSDN/DPNSS -------: DS1DPNSS.K01 07-May-2001 20:03 k01/ds1dpnss
DS1 CAS --------------: DS1CAS.K01 07-May-2001 20:02 k01/ds1cas
CEPT 2 MSDN/DPNSS -----: SX2KVDSU 21-NOV-2007 15:36 [VER-1.2.3.5]
CEPT 2 CAS ------------: SX2KVDSU 21-NOV-2007 15:35 [VER-1.2.3.5]
DS1 2 MSDN/DPNSS ------: SX2KVDSU 21-NOV-2007 15:36 [VER-1.2.3.5]
DS1 2 CAS -------------: SX2KVDSU 21-NOV-2007 15:35 [VER-1.2.3.5]
PRI E1 ----------------: NSU_PRI 9-JUN-2008 14:41 [VER-1.7.1.7]
PRI T1 ----------------: NSU_PRI 9-JUN-2008 14:41 [VER-1.7.1.7]
R2 --------------------: NSU_R2 17-JAN-2008 14:45 [VER-7.1.2.2]

System Data
-----------
Form Descriptors ------: FORMDESC 39.0.3.15 Wed 17-Jun-2009 15:24 si

Language Tables
---------------
English Language Tables: ENGLISHLT 39.0.3.15 Wed 17-Jun-2009 15:26 si
English Sets Strings --: DNITABE 39.0.3.15 Wed 17-Jun-2009 16:22 si
French Sets Strings --: DNITABF 39.0.3.15 Wed 17-Jun-2009 16:47 si
Italian Sets Strings --: DNITABI 39.0.3.15 Wed 17-Jun-2009 16:25 si
German Sets Strings --: DNITABG 39.0.3.15 Wed 17-Jun-2009 16:51 si
LA Span.Sets Strings --: DNITABS 39.0.3.15 Wed 17-Jun-2009 16:40 si
Dutch Sets Strings --: DNITABD 39.0.3.15 Wed 17-Jun-2009 16:29 si
Rom. Sets Strings --: DNITABR 39.0.3.15 Wed 17-Jun-2009 16:54 si
BR.Port.Sets Strings --: DNITABBR 39.0.3.15 Wed 17-Jun-2009 16:33 si
PT.Port.Sets Strings --: DNITABPT 39.0.3.15 Wed 17-Jun-2009 16:36 si
EU.Span.Sets Strings --: DNITABES 39.0.3.15 Wed 17-Jun-2009 16:43 si
Russian Sets Strings --: DNITABRU 39.0.3.15 Wed 17-Jun-2009 16:58 si
Swedish Sets Strings --: DNITABSW 39.0.3.15 Wed 17-Jun-2009 17:01 si
Polish Sets Strings --: DNITABPL 39.0.3.15 Wed 17-Jun-2009 17:05 si
S.Chi Sets Strings --: DNITABSCH 39.0.3.15 Wed 17-Jun-2009 17:09 si
Local1 Sets Strings --: DNITABLOC1 39.0.3.15 Wed 17-Jun-2009 17:12 si
Local2 Sets Strings --: DNITABLOC2 39.0.3.15 Wed 17-Jun-2009 17:16 si

Firmware Version
----------------
SS4025 Firmware ver ---: Main 6.3
SS4025 Firmware ver ---: Main 8.21
SS4025 Firmware ver ---: Main 9.12
SS4125 Firmware ver ---: Main 6.3
SS4125 Firmware ver ---: Main 8.21
SS4125 Firmware ver ---: Main 9.12
SS4150 Firmware ver ---: Main 6.3
SS4150 Firmware ver ---: Main 8.21
SS4150 Firmware ver ---: Main 9.12


 
Oh my, even I don't know the conversion to release from those numbers.

on the web gui, there is an "About" button up near the help.

What does it say?

**********************************************
What's most important is that you realise ... There is no spoon.
 
Im looking at a release 5 system and it says call control 41 so working backwards I think you are either MCD 4.0 or 4.1 which does not have scheduled operations

**********************************************
What's most important is that you realise ... There is no spoon.
 
Oooooh you might have more than a few issues if you're still at release 9

It's an even bet that your Hardware needs to be replaced $$$$

It's even more likely that your Software Maintenance has expired $r$$

Can you provide the Memory size found in the form: System Hardware Compute Cards

I suspect you will see something like this:
[tt]

Memory Size: 268435456

If you have 512+ instead of 256+ then you have good hardware

There is still a small chance that the RAM can be increased if the hardware is a CX chassis (picture?)

**********************************************
What's most important is that you realise ... There is no spoon.
 
The hardware is the MXe type and the memory is good

This is good news and it is upgradable

Now you need to talk to your vendor to find out if the sw maintenance with Mitel is active.

Upgrading from rel 9 is quite more complicated than usual so I recommend you hire an expert for that.

**********************************************
What's most important is that you realise ... There is no spoon.
 
Ok, thanks a lot, obviously i'll contact my vendor to do the job, but I'd like to know all issues and possibilities before that.

Luan
 
The DB was overhauled at MCD 4.0 (rel 10) to bring remote directory synchronization onboard and eliminate deep dance on Opsman. For single sites this is not much of an impact other than the fact that the upgrade must be staged first to MCD 4, then a database migration to convert the DB to the new format, then upgrade to MCD 5.
at each stage, the DB is incompatible with the next so it is imperitive to get backups before and after each stage.

In the background, the licenses on the Mitel AMC are also changed to a new format that cannot be rolled back.

If you were my customer and a standalone system I would discuss if your plans might include a 2nd system in the future as the license types are different at Rel 5 than at 9. If yes, I would recommend purchasing the networking option (if you don't have it already) prior to upgrading to convert your licenses to Enterprise instead of standalone.

There is probably a half dozen things I'm not mentioning but that is sufficient I think to convey the complexity

**********************************************
What's most important is that you realise ... There is no spoon.
 
P.S.

I have done several dozen of these upgrades myself. I can remember at least 3 that required Mitel Tech Support to resolve issues caused by the process (no error on my part)

If everything goes as designed, experts are not required. Experts are required because everything does not always go as designed and someone needs to fix it.

**********************************************
What's most important is that you realise ... There is no spoon.
 
Deep dance? Autocorrect :-(
Dependence

**********************************************
What's most important is that you realise ... There is no spoon.
 
Thanks for clearing up the deep dance! I was scratching my head on that one...
 
Wow, I didn't ment to do such long posting, I need to sync the short numbers to act as a part of a huge alcatel system, and in the future probably this mitel will be dismissed for a remote shelf of the main alcatel system. So by now my only needings are 3000 short numbers and the capability to import automatically a csv at scheduled time.

Due to the fact I'm not an expert on mitel systems, I'll order the upgrade by my vendor.

Thanks to everyone, very kind of you

Luan
 
Will the 3000 numbers be changing periodically?

If so, you may have a problem unless the short dial number remains the same and you are only changing the actual dialled number.

The Mitel can import Speedcalls from CSV.

The Mitel can update Speedcalls from CSV

The Mitel cannot replace speedcalls from CSV

The Mitel cannot range remove existing speedcalls (only 1 at a time [banghead])

**********************************************
What's most important is that you realise ... There is no spoon.
 
The speed dials will not change, possibly the dialed number may change in some occasions, the update has to be done daily or maximum weekly.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top