Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Upgrade Mitel 3300 MXe III 1

Status
Not open for further replies.

VoIPP

MIS
Jan 28, 2009
556
US
If we replace the 3300 control unit with a new up-to-date controller, can we continue to ise our ASU II units? Or will they not work with the new control unit?
 
The ASU-II's are compatible with the MXe's (gen 1, 2, 3 and L) as well as the CX and CX-II platforms.

If you're replacing the MXe-III with an EX, you will need another solution for Analog devices. I use Grandstream GXW-4224's - they work very well. Mitel is late to the game with their similar product, and since we have 50+ GXW-4224's out there, we stick with them... but if you're doing this from start, then you might consider going with the Mitel platform.
 
We have been very happy with Mitel's 72x port gateway - excellent for a project with a LOT of ONS devices. Haven't had any issues with it either.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top