Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Office 500 1

Status
Not open for further replies.

carmines1

Technical User
Feb 13, 2004
5
0
0
US
Where can I get info about upgrading a new IP 500. I keep getting a failure message when I try to upgrade it out of the box. The leds are flashing red approx every 5 sec. i programmed a user, and a trunk to no avail.
 
are you using default password of password??

tripped me up doing our in house IP500

Jamie Green

IPO ACA:Implement


Fooball is not a matter of life and death-It is far more important!!!!
 
try to make a reset with the reset button and then upgrade to the 4.0 GA Software.
IP 500 is shipped from the factory with 4.0.0 a not fully functioning version.
 
I did a reset and it still failed the upgrade to 4.0.5. I will try again. Catalyst told me to read tech bulletin 80 but that didn't help.
 
Its either firewall on your pc blocking port 69 the tftp port or you are putting the wrong password.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top