Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Office 500 Abnormal Termination

Status
Not open for further replies.

kc77la

IS-IT--Management
Dec 5, 2007
3
US
IP Office 500 system rebooted itself 6 times within reecent week.
IP Office System Status
Reason: Abnormal Termination
Termination cause: <DSI Excep> addr=003f008b d=5 pc=f0272510 stack=f0272490 f02742f0 f0287ff4 f027a208 f02799e4

Alarm Log
ALARM 30/11/2007 12:37:04 IP 500 4.0(7) <D51 Excep> CRIT RAISED addr=00000018 d=5 pc=f0276df0 f0276df0 f027a16c f02799e4 f02b34f4 f02b57b4

ALARM 03/12/2007 16:05:28 IP 500 4.0(7) <D51 Excep> CRIT RAISED addr=00000018 d=5 pc=f0276df0 f0276df0 f027a16c f02799e4 f02b34f4 f02b57b4

ALARM 05/12/2007 09:25:31 IP 500 4.0(7) <DSI Excep> CRIT RAISED addr=003f008b d=5 pc=f0272510 f0272490 f02742f0 f0287ff4 f027a208 f02799e4
 
Can you add a trace ???
There must be something that causes this


ACA - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
 
It happened again yesterday, though the error message was different.
ALARM: 07/12/2007 16:02:46 IP 500 4.0(7) <TLB Data> CRIT RAISED addr=00000018 d=5 pc=f0276df4 f0276df0 f027a16c f02799e4 f02b34f4 f02b57b4

Here is the log before it reboot.

91252062mS CMTARGET: 5.4.1 3743 Q931 Trunk:5 CHAN=3: CancelTimer CMTCCoverageTimeout
91252063mS CMTARGET: 5.4.1 3743 Q931 Trunk:5 CHAN=3: ~CMTargetHandler
91252064mS PRN: 0.16178.0 3743 Maggie.0 CMRecordingHandler::RecordingOnConnect() ep->callinfo.called_party.number.type=100, ep->recording_list.Size()=0
91252064mS PRN: **** This end is a phone. OtherEnd is an external line with recording_list.Size()=0
91252064mS PRN: CMRecordingHandler::CheckCallRecording: incoming=1, user name=Maggie, account=, ep->callinfo.calling_party.number.number=9718, ep->callinfo.called_party.number.number=168
91252065mS CMLOGGING: CALL:2007/12/0716:02,00:00:27,003,9718,I,168,268,WIRELESSCALLER,,,0,,""n/a,0
91252065mS CD: CALL: 5.4.1 State=2 Cut=3 Music=0.0 Aend="Line 5" (2.4) Bend="Maggie(168)" [Maggie(168)] (9.27) CalledNum=168 (Maggie) CallingNum=9718 (WIRELESS CALLER) Internal=0 Time=31378 AState=2
91252066mS CD: CALL: 5.4.1 Deleted
91252067mS CMLineTx: v=5
CMDisconnect
Line: type=Q931Line 5 Call: lid=0 id=4 in=1
Cause=16, Normal call clearing
91252068mS CMExtnCopyCallLostMsg: v=25
CMReleaseComp
Line: type=NoLine 0 Call: lid=0 id=16178 in=0
Cause=16, Normal call clearing
91252068mS CMExtnTxP: v=25
CMReleaseComp
Line: type=DigitalExtn 7 Call: lid=0 id=16178 in=0
Cause=16, Normal call clearing
Timed: 07/12/07 16:02
91252068mS CMExtnTx: v=168, p1=0
CMReleaseComp
Line: type=DigitalExtn 7 Call: lid=0 id=16178 in=0
Cause=16, Normal call clearing
Timed: 07/12/07 16:02
91252069mS PRN: Alarm log cyclic wrap
91252069mS PRN: Begin Stack Trace
91252069mS PRN: pc=f0276df4
91252069mS PRN: lr=f0276df0
91252069mS PRN: findfunc f0276df0 f027a16c f02799e4 f02b34f4 f02b57b4 f04c8df8 f04c14ec f04c1b10 f04c1cf8 f03eef90
91252069mS PRN: findfunc f03f0cf0 f04c3ce8 f03f0de0 f01a4c78 f0213ea4 f01a0574 f01a0538 00000000 00000000 00000000
91252069mS PRN: End Stack Trace
91252069mS PRN: .FATAL TLB Data address=00000018 d=5 pc=f0276df4 f0276df0 f027a16c f02799e4 f02b34f4 f02b57b4 IP 500 4.0(7)

********** contact lost with 192.50.40.11 at 16:03:07 7/12/2007 - reselect = 3 **********
******************************************************************


********** SysMonitor v6.0 (7) **********

********** contact made with 192.50.40.11 at 16:03:35 7/12/2007 **********

********** System (192.50.40.11) has been up and running for 28secs(28967mS) **********
 
I think this is the bug of 4.0.7.

I have this error for all of my 4.0.7 sites as the same error messages.

I will wait for 4.0.11

 
Which version is better? 4.0(10) or 4.0(11)?
 
4.0.11 is better. THere are alot of hunt group bugs in 4.0.10 and i heard today that there are issues with ccc in that version.
 
anybody have a link to the 4.0(11) firmware? Do you suppose this might fix an issue I have where the SCN does not find ext from one office to another?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top