Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

E1 faulty

Status
Not open for further replies.

ali-saleh

Programmer
Jan 5, 2020
29
LY
Hello
It was noticed that communications were interrupted via E1 between two locations, and for your information, a detection of channels was made from SDH and it was working perfectly, knowing that there was an alarm in the PABX (E/W) on the electronic board (ADP). We hope that you will help me in fixing this malfunction. Some pictures of the condition of the PABX have been attached.
 
There are no attached pictures.
Show the histf file from the moment of occurrence of the date and time within 1 hour after the incident. For example
STA-HISTA:SEARCH,2023-08-11/10:23,2023-08-11/12:23;
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top