D100 (POS IMO) not working on 9.1 1

[ipandy]

So I've read the different posts in here about how to make the D100 work but i am still getting a No Service message on the D160 handset. I've got the IPO set as file server, no d100 files on the SD card, downgraded to 9.0.6, tried to upgrade firmware to 2_0.9.6 from 1_0.9.6 (it won't upgrade firmware). Everything I've read says it should be good to go. I am currently downloading 9.0.5 bin files to downgrade even further. What else am I missing? Thanks

 

[Luzie67]

I´m an idiot ...
I´ve turned off SIP-Registrar in the IPO because of the Warning "No SIP Clients" in the Error-List ...
But D100 needs it ;-)

 

[derfloh]

Yeah... A stupid warning since SIP registrar is also needed for mobile clients like AvayaCommunicator or OneXMobile where you don't need to configure an extension for.

 

[Bolzplatzk1nd]

Hey,

I have a question about the D160 Handsets, how can i upgrade them ?

http://www.telezeit-aue.de

 

[Luzie67]

I have a question about the D160 Handsets, how can i upgrade them ?

From: "Avaya D100 Installing and Administering IP Office D100 100174766.pdf":

To update the D160 handset firmware, you must install Microsoft .NET version 4 and you must
use the D160 Upgrade Jig.

 

[Bolzplatzk1nd]

But where can I find the Firmware, i dont find it on support.avaya.com.

in the Manager there is a .bin File.

But The Handset Writer need a hex File, where can I find this file ??

http://www.telezeit-aue.de

 

[Luzie67]

I can not sure say that it´s right,
but have you tried to simple rename the .bin-File to .hex ?