Search results for query: *

OBTSYSTEMS, how do i do that? MLFTPM, pots and pri's to each system independently and then GW trunks between. Thank you!

Yes we are riding on there existing network as we are also using Polty's call center software and all this needs to be on the same network. This is working and we can call from one site to another, transfer calls to ext and Auto Attendants(AA). I can even call into one site get their AA and dial...

Hi everybody I have 3 tde 600 and 1 tda 50g connected, using high bandwidth connections and i have voice quality problems and we are being dropped at 5 min with no warning beep or indication. We are also using Sonic Wall firewalls and no routers. Any ideas or things i might try? Thanks!

Has any one come up with and thing????

Hello CWC3, Not sure what Comca is? Here in Long Island, and New York our cable company (Cablevision) supplies a service of a direct (fiber) Ethernet pipe up to 1000 mb to which they will pull out T1's for voice service as requested for a flat rate! Best explanation is...

Hey OBT I'm not sure where your from and are familiar with Metro Ethernet but here on Long Island it gives us a full 100 meg so we have lots and lots of bandwidth so my next question would be which settings do I change for the G711? And everything is on one VPN, meaning their data and the...

good morning OBT G729a and no routers as they are using Sonicwall Firewalls with QOS dsp 64 with the additional 16 licenses the only thing i found in trg grp settings (3.1.1) is co to co duration time set for 10 min as is ext-co (default) but i am timing out at 5 min???

OTB you seem like the one to ask, I have 3 TDE 600's connected via VOIP with 32 channels in each (expect high volume) and when connected or transferred though one system to another my voice quality becomes questionable and i also seem to time out at exactly 5 minutes? Any ideas? We are connected...

Gotya!!! Thank you so very much!!!!!

Thank you for the reply! Ok so let me get this straight if i have 7.0 or 7.1 the system will see 7316 sets as 7310's but see 7316E sets as 7316E sets? Thanks again this helps alot! :)

i have a MICS that was set up with all 7310's, then we started replacing sets with 7316e's. how do i get the system to see that the set is a 7316e not a 7310??? I am hoping this will resolve the line key starting on the 4th key? I also have a few that see the 7316e.

ok now i have checked every single ext number i can find in this system and the line is not assigned, i can't find it any where?????

I thought about that but, if that were the case way are the ports 8158 and 8160 working and just not 8159?????????? Principal user is not set up for for any of these ports????? Thank you! [ponder]

Ok will try to keep it short. Info: large system 3 cabinets connected to another system in another building Slot 13 4x8 card co ports 8157, 8158, 8159 and 8160 ext 167 same card 5th port 2 new lines with roll over i have installed these 2 new lines to 8158 and 8159 and these 2 lines appear on...

Thanks for the responce MM Ok i stink at tring to explain what is sometimes in my head i have been on this site for 12 hours and that doesn't help. Ok what i mean is right now 3 of the 6 operators have grp cover keys and 3 don't (cover keys on ext's 301 & 302) if the 3 with the keys are on the...

hello ok guys if i did or said some thing to upset any one i am truly sorry. Just a little under the gun.

HEY THANKS FOR YOUR HELP MAYBE YOU CAN CLEAR UP THE WAY I ASKED THE LAST QUESTION WHat i am looking for is off hook ringing with these 6 operators, does that make any sense? millty

once again i thank you for all your help

OK GUYS NEXT THING. NOW I GOT ALL THE PHONES RINGING, 2 QUESTIONS. 1 ONCE ALL 6 OPERATOR ARE ON CALLS CAN THESE PHONES KEEP RINGING ( LIKE THEY DO ON DIRECT INCOMMING OUTSIDE CALLS OR LIKE CALL WAITING)? 2 CALL CALLS BEING TRANSFERED FROM THE AUTO ATTENDANT COME IN TO THE PHONES ON THE SA...

DID I TELL YOU THAT IT WAS GOING TO BE SOMETHING STUPID!!!! YOU TA MAN THANKS SO VERY MUCH!!!!!!!!!!!!!!!!