Search results for query: *

XBK is an option 11 command if you have a bigger switch use BKO that will dump straight to the floppy

When a number of similar telephone sets are situated in close proximity it can be difficult to identify which phone is actually ringing if they all have the same ring sound. The Meridian 1 system provides four different ringing cadences which may be assigned to digital sets. The four can best be...

Log on to mail administration Main Menu Select Option 1 (User Administration) User Administration Select Option 1 (Local Voice User) Select F8 (View/Modify) Enter mailbox number When mailbox details appear on screen carriage return to Logon Status If disabled, enable by using arrow keys...

The CLS (class of service) relating to the display feature on an extension can be one of the following: ADD Automatic Digit Display (incoming calls will display on arrival providing that the extension is not an ACD set) DDS Delay Digit Display (incoming calls will not display until the call is...

all the console error codes are in that manual download it and check

ooops http://www.pbxtechsupport.com/manuals/m125_4x.htm

go here scroll down the list till you see attendant console description

LD 20 req prt type dnb cust x

go here and download windecoder it's something i picked up sometime ago.. never used it http://www.colinmawbey.plus.com/

from memory get into PDT pdt> pcmciaformat a: PCMCIA 'a:' will be formatted (y/n) ?y (It only takes a couple of seconds!) Formatting PCMCIA 'a:' Format complete

You must format the card with win9x or the switch will not recognise the card ..do not use nt/win2k/xp cards on Rls 24 and earlier can only use 48Meg Card and Rls, 25.08 and higher can use up to a 64 Meg Card. if you get Type II ATA flash cards, they are usually already formatted

you can add a key to the sets to opt out of the group when unavailable key x GHD

look at your RDB in LD21 for the prompt PRDN,, then print that DN number and have a look

To create Hunt Groups you need to use LD18 to store the extensions in the Group Hunt List and LD57, which assigns the Pilot DN to the Group Hunt List. LD 18 REQ NEW TYPE GHT CUST 0 LSNO (Next List Number) DNSZ (Directory Number Size) SIZE (Size of list, How many entries) STOR 00 XXXX...

to print them LD 81 feat=PVR

is this setup as a HUNT GROUP using a pilot DN ??? looks like just a forwarding setup to me...

To create Hunt Groups you need to use LD18 to store the extensions in the Group Hunt List and LD57, which assigns the Pilot DN to the Group Hunt List. LD 18 REQ NEW TYPE GHT CUST 0 LSNO (Next List Number) DNSZ (Directory Number Size) SIZE (Size of list, How many entries) STOR 00 XXXX...

easy way add AO6 in the CLS of each set ( allowing upto 6 conferenees) or install a MICB card ( Meridian Intergrated Conference Bridge ) cant help with question 2

from memory.. 25 pin.. blues and oranges for TN's, red/oranges & red/greens for power blues to rj45 pinout 4 & 5 oranges to rj45 pinout 1 & 2 red/oranges to rj45 pinout 3 & 6 red/greens to rj45 pinout 7 & 8 try that it's close...

yes..