Search results for query: *

I was meaning, you can program the PBX using a dterm phone. I was curious if you could use another phone. Not directly connected to the pbx. Like my home phone or cell phone. No big deal I got it working with hyper terminal. Thanks again for all your help.

Can you explain in further detail. I don't understand what indial or DITing a pstn line to that extension. Currently I have a DID associated to the extension of the dial in modem. I have connected using hyper terminal and was able to do everything I needed, but making changes from a cell...

Its not possible to dial into the PBX using an outside phone/handset/cell phone, is it?

Nevermind guys, i got it going!!! Thanks for all your help. Last question, is there a way to setup some sort of authentication or security to prevent unauthorized access? Thanks again all of you!

Just to make sure I understand, I have the ext and associated it with a DID. so i just dial that number from a PC to connnect, then open hyper terminal, and use the same keys i use in MOC terminal? I don't need a modem string, or anything else???

Ok thanks for your help on this, one more question, what do I use to connect with the PBX? Software? I have all of the manuals for the PBX, is there any documentation explaining how to make changes to the PBX? Thanks,

We have an IVS system. Is this feature still available?

Hi, I want to setup an extension so I can dial in remotely and make simple changes to the system, like call forwarding. Can someone explain how to set that up? Thanks,

How would i find this out. Honestly I don't know :( I have posted all the data from those cmd's

Currently we have a DID block of 100 and they are associated with 5xx series of stations. we just bought another 100 DID's and are trying to associate them with stations 6xx. I have went through cmd 760 & 761 and setup the digit converstion. But when I dial 60, the phone displays Restricted...

So for the phones we use there really is no point in assigning one touch memory blocks to extensions?

That makes sence. So I am gonna list how a station is setup here and maybe you can tell me if its right or incorrect. Or suggest another way. Under key data assignments for a dtp-8-1 phone keys 1-5 are programmed as station speed dial. F1101-F1105. Then 6 is programmed as handset/headset. 7...

I am curious what the difference is between Speed Dialing and One Touch dialing. I use matworx when setting up the memory assignments for a new extension. And each ext has a one touch and speed dial memory assignment. But Why. What is the purpose of both. From what I have seen, either can do...

Hi, all mail that we send from our company is blocked by AOL. I am working to fix this problem but am having a tough time. Hoping someone has had this same issue and can provide some insight. At this point I feel the problem is because when performing a reverse DNS lookup of our IP, it fails...

Thanks alot guys, both of you. Sorry I haven't responded. I just got the email saying that I had responses to my question. I do have both manuals and got it working. Thanks for all your help. Both of you :)

It is possible to create a extention that doesn't allow dialing. When the handset is picked up, it automatically dials a programmed ext. Kinda like the red presidential phone. :) We just want it so when its picked up it rings another location and then they answer, but the user cannot dial...

So if i just pull out the cotb card an insert the cotg, our 4 pots lines will be up and working again? But incoming caller id data won't be coming across until i install the 4rstc card? 20 is our PRI, i should change that to 15? What does this feature do?

cmd f63 de 005fffa9 de = FFA9: 28 ff ff ff We are located in northern california. So installing these cards is a major job? I have spoke with our local vendor. They are not very good at supporting this system and that is why I am trying to avoid using them. Our system is configured to use a...

i have all the manuals, including the feature programming manual. CMD 35129 de 00-63 de = 7. CMD 3509 de 00-63 = 15, except for 3509 de 20 de = 8. CMD 3520 de 00-63 = 15, except for 3520 de 20 de = 00. i hope that is what you wanted. I am not sure where to start on this project but any and...

When I install digital (4LCDQ) or analog cards (4LCD-A) depending on the slot. It gets 4 lens. IE digital card = LEN 0116, 0117, 0118, 0119. Well I installed a PN-AUCA card yesterday in slot LT13. This is a 2-line card. I assume it will use LEN 0120, and 0121. But what happens with the...