Search results for query: *

sent you email, waiting to hear back

i paid 55.00 US so somewhere around there, what do you have if it is a barter situation?

jeanswear i do have that unit, i was going to put it on EBay so let me know if you want it. thanks

Arr, Yes i see that, and have read that but i think we are having a misunderstanding, I dont care if it rings several telephones, I have it set so only DN 24 Rings and then after x rings it pages the chimes. This part works now, but there is erratic behaviouor on why it is calling the DN on...

Well, i havent seen that in the instructions i got here so i havent tried that. However, power went off here today and of course came back on, about 1 hour after power restored the doorphone started calling the DN about 5 times in 10 minutes. This of course with no one touching the doorphone. I...

just to be clear on that Arr, if i have a 3x8 KSU i currently have 7 phones and 1 doorphone, are you saying to make the doorphone work in need to go to 6 phones 1 doorphone and 1 blank DN? What i do find strange though as i have mentioned is that last night and ALL night about every 2 hours i...

well well, as i sit here at my PC my doorphone has decided to call the DN it is assigned to and then run the page tones, looked at the front door and guess what, no one was there. I pressed the button and nothing happened. Well now i know the doorphone works, but any ideas as to why it would...

will do, just to confirm and rule this out, i used CAT5e cable for that run, so would that wiring affect its ability to page the phones?

I should also note i have an ATA2 on DN 26 using a Cordless phone, dont know if this affects anything

ok let me try to explain Justatec explaination seemed broken up, no continuity. but here is my doorphone programming F900 DN 27 Volume High Call DN 24 Rings 5 Page Zone 3 Chime Type 4 Opener type none Now DN 24 is set to be on page zone 3 and setup as per instructions in the doorphone manual...

your input seems somewhat scattered, i believe i have followed what you have suggested, however no change, i can intercom to the doorphone by dialing DN 27 but if i hit the button on the doorphone nothing happens on the phones, so any more insight would be great. thanks

Well finally got the correct doorphone for my 3x8 KSU hoooked it up and guess what, only partially works. I believe i have followed the instructions but still having problems with the doorphone ringing the lines. My DP is DN 27, i have it set to ring 5 times, and page zone 3, prime line is I/C...

know anyone that has the right doorphone? and how much?

Just bought a Nortel Venture Doorphone thinking it was a doorphone for Nortel, however i cannot seem to get it to work with my system which is a 3x8 KSU 5.1, is this doorphone restricted to the Venture system or is there a way i can make this work? thanks

My question is this, if you can attach up to 4 doorphones to your system, why is it only 4, if you have a 3x8 KSU shouldnt you be able to use up to 8 ? So given that, and reading the manual for a doorphone, it says to plug it in to one of the DN's of the KSU. Well if you have all 8 lines...

Got it, somehow it did get forwarded so the solution for those that may do a manuver like me, i fixed it by flash/link #4 on the cordless. thanks again bkrike for all your help

hrmm, still not working quite right. prime set is in my office (21) ATA2 is (26) if i try to intercom 26 it will display "calling cordless" and then it goes to Cordless>bedroom, bedroom being (23) and rings the bedroom line. I have the cordless on the ATA2 set to prime line I/C, ringing line 01...

hrmm any further info than that, i was just playing with it again and lookin at the DN somehow now it seems i have assigned a new DN to my prime set here in my office which was the DN of the ATA2. Now the ATA2 is on my office DN, a bit of a switchero, but if i try to intercom to the ATA2 it...

ok i am back, just upgraded to dr5.1 and the ATA2 started to work. I had dialtone yahoooo. I did as curlycord suggested and put in the external hotline and the feature 78, now to dial out i just pickup reciever and dial 9 followed by the number. My final question is to get it to ring. When i...

Can anyone tell me what is the minimum system requirment to have a doorphone on the system, IE. will a 3x8KSU DR1 or DR5 work? thanks