Search results for query: *

Surprisingly enough, the actual SIP trunk is working great. :) The call display on the phones on the AST side coming up as Anonymous though is driving them nuts.

Hi everyone, I've struggled with this for a bit and am at a dead end, I'm hoping someone out there might have some thoughts. I have a BCM450 with a SIP trunk to an Asterisk server. All calls are working fine, however, when a call is presented from a local extension on the BCM to a local...

Hi all, Complete newbie question here (mostly because I've never had to do this particular function), but I'm installing a DLC into my CS1000E system. From everything I've read, all I seem to need to do is put the card in the slot and program a phone. Here's where the stupid part comes in...

I'll join the chanting, it'd be nice to see that problem fixed, the workaround is a bit clumsy :(

There's a Nortel bulletin on that Bulletin # - 2005006172 After a period of inactivity (such as Overnight) the M2250 console display can fail. Failure symptoms range from: a few out-of-place pixels or characters, appearance of columnar bands, full pixilation/garbling of the display, and in...

The I2007 is an odd little bugger, you actually install it as a different type of phone on the switch: Configure the IP Phone 2007 on the system as IP Phone 2004 using LD 11. At the prompt, enter the following: REQ:chg TYPE:i2004 For more information, see Software Input/Output: dministration...

Nortel changed the patch/deplist command from mdcs to mdp in 4.0. :)

I scanned through the thread, was wondering if you checked LD 15: IFLS (NO) YES Ignore Switchhook Flash signal from 500/2500 sets The default for IFLS is no, but if for some reason it's been changed to YES, that could cause the problem. cethlenn

If you want to use these to install software onto the PBXs, be careful not to format the card with any Windows application :( Once formatted by Windows, all you can effectively use the cards for is backups. KatW

Thank you very much! That was exactly the problem and changing those two settings (Disconnect Supervision In and Out) to Y, completely resolved the problem we were having! Cethlenn

It's a tie trunk group, linking our Asterisk server to our Avaya PBX.

Hi, We have a Definity G3R switch tied to another switch. Avaya Definity G3csiV11 Calls from the H323 TG to extensions local to the Definity work fine... its only when we try and go out another TG that it chokes (ie.. outbound call) We get the following message...