Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. jknichols

    Power Adapter to device database

    Well, in my book, a "Transformer" is an AC only device that simply steps down (or up) the AC voltage using two magnetically coupled coils of wire, so that anything that changes AC to DC or filters the output could be a "Power Supply". That being said, these little black boxes have been "AC...
  2. jknichols

    Issues with Gmail account

    I don't do Gmail, but it appears that you are connecting to an IMAP server but trying to use the POP3 protocol.
  3. jknichols

    Can I tell what phone number is being dialed by an alarm panel?

    Have to wonder if the alarm company has one incoming line with their modem locked to a lower speed which will connect better with Cable connected panels. I can't believe (Actually these days I'll believe pretty much anything) that the Alarm company is living with a bad incoming line - they'd...
  4. jknichols

    dhcp server errors

    Check DHCP Option 3 - Routers disclaimer - I just Googled "DHCP default Gateway", it has been ages since I set up a DHCP server.
  5. jknichols

    Help with a video adaptor from PC to TV

    Look for DVI to HDMI, it may be as simple as a cable.
  6. jknichols

    programatically controlling the stapler

    I don't know this multi-function printer, but the FAX function is probably accessed via a separate driver, not PCL or PJL.
  7. jknichols

    Decoder with multiple RAMs

    Can't help with the programming part, especially without knowing the system / CPU, but you have a 20-bit address with the top 4 bits always high and the remaining 0xF0000 thru 0xFFFFF divided evenly into 8 blocks. Chip 1 would be 0xF0000 thru 0xF1FFF Chip 2 would be 0xF2000 thru 0xF3FFF ...
  8. jknichols

    FAT32 folder name change

    What you need is a hex editor that is able to mount the raw drive and edit individual sectors
  9. jknichols

    TOSHIBA DK 280 PROGRAMMING

    You need the I&M manual or at least the "Program Record Sheets". It's been ages since I worked on a DK, but I don't recall ever using a "password" for keyset programming, although there is a special key sequence to enter programming mode.
  10. jknichols

    Wall penetrations in HVAC closet with one 1 HR rated firewall (fire wall)

    I'm going to go with an overly cautious AHJ, not actually in the written code but still within his authority to require. Kind of like the local Fire Marshal who required all paint in my community theater's scene shop to be stored in a fire resistant metal cabinet even though it was all latex...
  11. jknichols

    Printer won't grab IP, but Laptop WILL on same ethernet wall jack port

    LOL, in hindsight, was the laptop actually making a wired connection thru the jack, or a was it making a wireless conection?
  12. jknichols

    Discussion between me and an IT tech

    While I will agree that there are time when it is expedient to split a cable or run a long patch cable around/over a wall on a TEMPORARY basis, there is no excuse for getting lazy and not connecting all 4 pairs on the initial install. Likewise, if you know you are pulling a cable on a difficult...
  13. jknichols

    Mircosoft Excel, printing solution

    Does your projector have a setting for Rear projection?, but then everything whould be reversed not just the spreadsheet. As Cmeagan said, some printers have a mirror image mode to print t-shirt transfers, but again, that would affect all printouts, not just the room layout.
  14. jknichols

    Tortech PA-35 paging amplifier

    Look for "Bogen WMT", that's what popped up out of the depths of my memory for the matching transformer we used to use to convert from 600 ohm paging to Aux input
  15. jknichols

    telephone not ringing out

    What happens if you connect alarm panel directly to the phone line and call that number? Does it answer immediately, or possibly ring busy? If you have a test phone (buttset), will it dial out and ring in with just the test phone and panel connected to the phone line? Basically I'm trying to...
  16. jknichols

    Client doesn't have MS Office

    For Access 2007 Runtime: http://www.microsoft.com/en-us/download/details.aspx?id=4438
  17. jknichols

    Power Question for CCTV?

    Gee, pull up a ten year old post to make a point - and irrelevant as it take a lot more skill to link switches in a "stack" that pulling and verifying a cable. I've learned a couple things along the way: 1) always verify at least basic functionality on a cable run before closing up the ceiling...
  18. jknichols

    End user to reset own Password

    You can log into your mailbox and go thru the menus to change the passcode, but it would be a major security issue if an end user could easily reset someones passcode without knowing the current one.
  19. jknichols

    Pick up a transferred call?

    Call Pickup" Try [Feature] 7 6 then the extension of the phone that is ringing. (this is from the MICS guide, but should also work for CICS)
  20. jknichols

    Long distance codes- Through CCA

    [smile] CCA - Copper Clad Aluminum - A junk type of CAT5 or CAT6 cable that won't pass certification; but not sure how it relates to long distance codes. Just to show that one person's shorthand can be meaningless without sufficient information. [smile]

Part and Inventory Search

Back
Top