Search results for query: *

FWIW, I have upgraded lots of the older EEs and the modem issue seems to be directly related to the WAN/LAN systems vs the LAN/LAN systems. I have never gotten the modem to work after upgrading a WAN/LAN EE and have always gotten the modem to work after a LAN/LAN EE is upgraded. I think there...

What exactly is the difference between full and partial double density?

You might want to look at www.dcslab.net They have an excellent Call Accounting product and are really cheap (under $300). While the developer is in Moldova, whenever I need help I email him and have always been pleased with his quick turnaround, program fixes and support which are waiting for...

Check the channel addressing on the card, especially for bus 6 and 7. That PRI kust might be there and bus 2 needs to be changed.

bcmpimp, I have had success doing this as well, however, what about OUTBOUND calling? How did you make your BCM pass ANI over the T1 circuit so that YOUR callerID could be displayed to the remote endpoint? I did not see a way for the BCM to do this. THanks, Harold

Mrmarshall, How do I get to your web site? Can you email me a link to harry@partyplace.com ? Thanks

Mr Marshall, Can you please post a link to your site here?

If you are making calls FROM the GATM, the callerID is FIXED at the telco for each particular line. Anything you put in the OLI field will be ignored. You should check specifically which trunk you are dialing out from and ask the telco to check the callerid associated with that line. You can...

What type of device are you dialing from? SPecifically are you doing this from a digital phone or from an ATA attached device?

Are there any similar excel spreadsheets that can be derived from a BCM backup of any type? An .xlc programming record would be a very nice thing to have...

Ever since we added a WAN card to our BCM 1000 3.6 and removed the LAN 2 card, we can no longer access the modem in the system. Does anyone have a LAN card, WAN card AND Modem card all functioning in the same BCM? If so, is there a trick to getting this to work? We have run and rerun the...

If you get a Nortel BCM, you can use IP phones (or even the i2050 software) to connect the 2 sites. Then as long as you have an Internet connection at both places (ala cable or DSL) and given they will be from the same provider, you should have excellent results without running cables across...

Mark, PLease let us know if you find a way to do it. I have been working on this problem for years. The only circuit I have found that affords this capability is a PRI.

My 2 cents here. A while back I went nuts trying to debug a problem that was related to a not being able to successfully dial into a RAD. It would connect then hang up shortly. It turned out that the Services card (thats the other function on a combo card) was an older revision and while the...

Has anyone upgraded their existing MICS to Release 7.0 with a NAM running as the voicemail? If so, did the NAM need to be brought to V4.1 to work?

Jdavid, Can you be a little more specific, perhaps with a programming example? Help is appreciated.

I thought I had this all worked out before but something must have changed. My problem is that there is a single trunk line ringing on several phones and they are all set to go to voicemail after 4 rings. My problem is that I do not understand which VM the call will go to. In the previous...

I had thought there was a thread on programming a BCM from a handset. I understand that there is some F code to do this with caveats, but nonetheless I was wondering if anyone knew what it was. While I accept that this is not the preferred or recommended route, there are times when no IP...

Thanks, you were all on the right track. ALthough IE6 under Windows 2K does NOT have the Popup blocker, I had installed the real player, which unannounced installed the yahoo toolbar on my IE and the Yahoo toolbar had the popup blocker installed. Gimme a break!

Yup Yup Yup. Luv2ski nailed it with the MR release. Took care of my headache about 3 weeks ago. Saved my relationship with a big customer. I owe ya.