Search results for query: *

I have a customer who wants to use their PagePac Amplicenter D20 attached to a telco provided Centrex line. The line from the telco is analog loop start. If I set the pagepac to loopstart mode via the selector switch, the pagepac should pick up when it's called. Is there anything I'm missing...

hpwizzard, A majority of the printing is actually PDF documents so you are probably on the right track. There only 4 users in the office and the problem doesn't seem specific to one computer. Can you think of any tweaks on the client side that would make printing a little less stressfull...

I have an HP 2600 in our office that sometimes locks up when setting the "Number of Copies" to anything greater than 1. The first copy will generally print but the printer then locks up. I have also experienced this when multiple users have tried to print at the same time. All users print...

Thanks for the input. I'll try out your suggestions tomorrow. I hope I can locate the HP Toolbox software that would have come with the printer. It may still be out in our Denver office (I'm in Minnesota). By the way, I'm almost certain that it was transported with the toner installed...

I have an HP 2500 color laser printer. Magenta and black fade out on the left side of the page, aproximatley 1" from the edge. All print cartridges are new. The imaging drum is also new. Only HP OEM products have been used. Total page count is 14392, color page count is 8945. Any help...

What phone system are you using? Are you trying to forward to an outside line through the phone system or through the VPS as a custom service menu item? Outside to outside line transfers must be enabled in class of service to work. There is usually a volume drop associated with CO to CO...

Franke, thanks for the response. Chris

I'm in the process of programming a Legend 6.1 to replace a Merlin II. The system is in Hybrid / PBX mode with 5 incoming lines that should only ring at the receptionist. I would like the new system to function as closely as possible to the Merlin II. The old system has the default Int. Ring...

I use a Partner LU-ADS on the Partner II system in my home. It plugs directly into a station port (no controller), and it looks pretty good. This is the most current model from AVAYA as far as I am aware. Chris

Thanks for the insite. I had wondered about the MLMs, it seems like you can pick those up pretty cheap. I only deal in Panasonic systems in my professional life. My only experience with the Avaya product is the Partner II and Partner Mail R3 in my home. Thanks, Chris

The company my wife works for has a Merlin II system (R3 processor with FM3 and four 408 cards). They would like to add voice mail. They are looking for the cheapest solution possible. In my opinion upgrading to a Legend processor and getting Legend mail would be better than installing a 012...

To call forward to an outside line: -Press [intercom] 7106 9 (phone number) # Don't forget that you will have to return your phone to normal forwarding when you return to your desk. For busy / no answer forwarding to voice mail -Press [intercom] 7105X (X represents your VPS extension...

It is my understanding that the KX-TDA50 will but the TDA100/200 will not, at least in the current revision.

Thanks for the replies! The system has been powered down and back on but the problem has not been solved. Looks like bad ports. Thanks again, Chris

I have a 206EC card R4.1. Two of the ports work for standard analog phones but not Lucent proprietary phones. When a known good Lucent/Avaya phone is plugged into one of the ports in question, it seems to receive some power from the card. I assume this is coming from the center pins on the...