Search results for query: *

CableMonkey, Were you able to complete this project. I am starting the integration of Intuity and Unity. Could you explain to me how did you integrated this two devices. Cisco is telling me that I need a PMG box with digital port terminations. This is not an issue but I am still failing to...

I need to upgrade one of our sisters company G3Si. I am looking at the S8500 because of size, but have two questions. Can I use the existing SCC1 carriers with S8500? Can I have a configuration of dual S8500 control (like the S87XX)? Thanks for any feedback!

Start by creating a callmaster station. Then decide if the configuration is going to be roadwarrior(VOIP) or telecommuter. If it is roadwarrior, remember to create and assign a media extension. Now go and configure this station on IP agent. Once again, if it is roadwarrior configuration, select...

Dude I've had this problem berore and it is like looking for a needle in a haystack. Since you allready changed headsets (most common problem)change all wiring (from wall jack to headset)and if you can, status the station while in a static call and get the trunk being utilized. Test this trunk...

Yes! I allready have these two sites DCS to a third site. I just want to close the triangle. I know that I need to create a DCS trunkgroup but is that all?

I need to DCS two sites. Does anyone know how to do this?

Great!I visited the options you mentioned and AVAYA did not do anything on this so I made the changes (I also found a doc on how to configure the com pro form). One question, do I have to reboot CMS after the changes? I tried to pumpup translations after changes via maintenance>ACD Stats but...

I am connecting one of my sister's company G3R PBX to my CMS. I am going thru a pair of firewalls and the WAN. I am able to ping the PBX from CMS and CMS from the PBX but can't get the CMS link up. I did some snooping and found out that all my PBXs have traffic on port 5001 (this is the...

I got you! let me ask you this; if a user dials "0", how can I point that 0 to pass extension 12345. I tried translations and masking but it did not work. If I dial "0#" I get the avaya operator inmediately. I need to find a way to make this happen automatically.

iptuser you nail it on the head! I was able to bring down the inter digits timeout. My route pattern for 0 is "0", I tried 0! but it did not work. I still have like a 5 second delay but I will try using a translation to see if it works. Thanks for your help!

Good Idea, I will verify if the "0" on the AVAYA PBX is set up to route to a VDN and try a translation to that VDN on the CCM side. Thanks for the suggestion! I will keep you informed of the results!

There are no other route patterns with "0". The users needs to dial "9" to reach my AVAYA G3R PBX for outbound calls. If I dial a "0" on a cisco phone, CCM reaches the tie trunk to the G3R but waits about 12 seconds to pass the "0" which eventually gets me to the operators. I hope this help.

I am a newbie in ccm. I integrated a CCM with an AVAYA G3R. My operators are on the G3R and I need to configure the "0" route pattern in CCM to reach my G3R. I did it but it appears that CCM has a time delay of about 12 seconds (wainting for more digits I guess) before it routes the call. How...

megaco, I tried to give you a star for you tip but keep having errors. Thank you very much.

Thanks for your input gents. Anything special to be done with routing paterns??

I recently integrated a Siemens PBX that is not IP enabled with CCM. I need to integrate a Definity G3 that it is IP enabled. Has any one done this? Do I need to create a trunk group with physical ports from a DS1 board? Thanx! Ken

I dont have an answer for your question but I do have a question for you if you dont mind. I siccessfuly deployed CCM in a Siemens PBX that was not IP enabled. How did you configure AVAYA via IP trunk??? Do I still need to create a trunk group and assign channels from a DS1 card. Thanks, Kenpen

Thanks TelephonyG... I will try it first thing tomorrow.

There is a memeber called G3Rtech that mentioned while discussing FTP backups for S8700 but I am new at this and do not know how to e-mail him\her the question. Any deas on how to do this?? Thanks

I am running CMS V12 on a Sun Enterprise 3500. I would like to run an FTP backup but I have two problems. 1) I was told once that doing this would void my maintenance agreement with AVAYA. 2) I do not know what files to back up. Any help out there?? Thanks, Kenpen