Search results for query: *

so I did! fixed :-)

tried esc key earlier - it just seemed to crash it with error code=21. Tried the at-debug command. worked perfectly! thank intrigrant :-)

Hi there, Can attach to DTE port as per FAQ but although AT command generates an "OK" any other such as AT-X, AT-X2 or AT-X3 generates "ERROR". I am trying to default the unit. Any ideas?

all sorted :-) someone entered a VLAN entry where none was needed. thanks again for your excellent help guys.

Hi tlpeter: yes we did that.

Thanks for replies. MTVilla: Keys just beep jconrad0305: we use vigor 2800's - but surely as it's a VPN link, that is irrelevant? (vigor say so when asked). Where do I set manager to 255.255.255.255? I have noticed that the IP phone has stopped responding to pings from this lan but will respond...

Hi, Sorry to be a pain but does anyone have any ideas?

Hi again, OK we are still stuck. Have added the route into the IP401 and now the remote site can ping it. Both sites can ping the phone. The phone will not answer calls, it just sits there saying "discovering 192.168.42.1" (the IP401 IP addresss). Any ideas?

Hi Peter, OK I added the route and now the remote side can ping the IP401 :-) It still fails at finding TFTP... It seemed to work on the local lan without Manager running. I have the Manager but only on the local lan - do I need to install Manager on a PC on the remote lan too? Will it need to...

MrIPO: I admit I assumed the IP401 IS the TFTP server? The IP 401 doesn't seem to have way of entering a gateway address. Local lan: 192.168.42.0 (subnet 255.255.255.0) IP401 192.168.42.1 Router/Gateway/VPN 192.168.42.254 Remote LAN: 192.168.0.0 (subnet 255.255.255.0) Router/Gateway/VPN...

Hi, Anyone any ideas?

Hi, OK, got me a couple of 4621SW phones, they work great on local lan :-) However, when I sent them to our remote lan site which is linked to our by VPN I get "failed TFTP server". I can ping all IP addresses on remote site from local site and remote site can ping all on my site (except the IP...

sorry to be thick but I can't find the info on avaya's site... is the 4621 the same as a 4621SW?

thx! what's a 4621SW?

thanks guys, forgot to mention we do have the VCM card, so all I need is to find a 4620 handset?

Hi there, We have a IP 401DT4 and wish to get an IP extension working at another site where there is no IPO switch. We have set up a VPN between sites but can't get the IP phone at the other site to register with the IPO. Auto register is set to enable on the IPO. Does it only work if you have...

thanks for suggestions. Re-booting the switch fixed it! (sorry, should have tried the obvious first)

Hi, IP 401 system. All was fine. Changed nothing (that I can think of). Suddenly our VMLite recordings are no longer intelligible, it's as if they are being recorded underwater! The VMLite server drive has been defragmented and the server re-booted to no avail. Any ideas?

Hi, Can't see an option anywhere in VM Lite to use SMTP instead of MAPI. Is there one? A reg hack perhaps? Cheers, Mogman.

We have an IP401 DT4. Downloaded v2(16). It worked fine. Unit flashed with new firmware OK. But if we run the 'wizard' it finds the unit, the password works ok, it reads the config, checks the shortcodes etc then says "The application could not recognize the control unit" and then "the hardware...