Search results for query: *

Check this commands: list trunk disp fea disp dial para Probably You have networked PBX and this is a "shortcode" to call

It works only for one output. When I try to user more than one ip adresses, data is sent to the first one.

There are no free (voip) channels on FarEnd device (Cisco) Signalling is working well. K

Hi, I want to receive Ascii data on port 9123 and send it forward to many other IP's on the same port or different ports. How can I do it. I know that i can use "netcat" to catch network data netcat -l -p 9123 >> net-data.txt & I can look at the data using "tail" tail -f net-data.txt But how...

Hi. My device sends data (ascii text) to other device using TCP on port 9999. Is it possible to copy this data to few other devices with different ip addresses (on the same network port or different port) on the same switch? How to configure this? Regards K

8 ports on the left side are digital ports for system phones. 8 ports on the right side of ip403 are LAN ports. 2 ports in the middle are analog stations ports. Konrad

Hi, Are avaya 16xx ip phones supported by IPoffice (IP400 or IP500)? Regards K

make vdn send external number to vdn make vrt table with "anoying" number in vector connected to vdn check ani in vrt than route to "busy" or "disconnct" step. if not - route to user internal number

In ip-codec-set form: page1: Set g.711A or g.711Mu (depends on your settings) page2: for FAX set "t.38-standard"

Hi, I'm just configure BSR on two locations. When I trace main vector I recieve "NO DATA RETURNED FROM POLL" 17:38:09 490 1 vdn e49100 bsr appl 1 strategy EAD-LOA override n 17:38:09 490 1 <blank> 17:38:09 490 2 announcement 8517 17:38:09 490 2 announcement: board 01C04 ann...

Hi, I have s8720 with cm4.0 and 2 ess servers. I don't use CNA or CNB network. I use CNC network. When I configure server interfaces I should set: customer lan - eth0 service - eth1 CNA - eth0 CNB - unused I have CNC enabled on both servers. Should I set CNA to unused? Regards Konrad

Hi, When I make "list media-gateway" command I can see additional letters (OH or N) on the left side of serial number. What does it mean? My CM is 3.1.4 with latest patch. list media-gateway Page 1...

I've just made an upgrade to 3.1.4 and I have the same issues.

Hi, Did You use this firmware already? I've just use this and many of my phones (4610, 4625, 4621) don't work propertly. When I press some type of programmed buttons (directory, auto-call-back) phone is rebooted. CM is 3.1.2 with latest patch. Regards K

It takes about 200MB. K

what do You need to know? Did You install bcms server? Did You connect it to clan ip-address?

Check INTERDIGIT TIMER on system-parameters features, and try to send digits to meridian in enbloc in trunk-group form.

Look at this configuration sample. !create new vlan set vlan 2 name "V2" !setting vlan binding set port vlan-binding-mode 10/3 bind-to-configured !enabling trunking/tagging vlans on port set trunk 10/3 dot1q !setting ip-address on interface interface Vlan 2 icc-vlan ip address 3.3.3.131...

What type of cabinet are you using and which type of reliability do you need?

Find Your modem's windows driver. It will be a *.INF file. Open this file with notepad. It should look like below: ;Windows 2000/XP WDM Modem Setup File ;Copyright (c) 2004-2006 Motorola Inc ;Manufacturer: Motorola Inc [Version] Signature = "$Windows NT$" Class = Modem Search...