fax over ip

[backe]

Hi, all
Can anyone tell me how to set fax over ip?

I am using S8300/G350 v.5.0. and IP Office - SOE v.4.0(10)


S8300/G350 side:
on IP trunk I've set:
- DTMF over IP: out-of-band
- Direct IP-IP Audio Connections: n
- IP Audio Hairpinning: n
on ip-codecset 1 I've set:
- Audio Codec: G711MU
- Fax: relay

IP Office side:
on ip trunk I've set:
- GW address: <S8300 addr>
- Compression mode: Automatic Select
- H450: None
- Enable Faststart: Checked
- Out of Band DTMF: Checked
- Allow Direct Media Path: Checked
- Fax Transport Support: Checked


I would like to say that I've tried various combinations and nothing worked!

I'd like to add that systems are on same subnet, literaly side by side

Can someone post me a conf that works!!!

 

[captainnick666]

how is your codec set up? try pass-through

 

[Konri]

In ip-codec-set form:
page1:
Set g.711A or g.711Mu (depends on your settings)
page2:
for FAX set "t.38-standard"

 

[big70]

IPO can,t do T38 did you try to change it to passthrough


Greets Peter

 

[backe]

Thanks a lot!