Search results for query: *

Well 3G doesn't work even if I have an open internet IP on IPO (works OK from a remote WiFi network). I will try to do a test with another router to see if it solves the issue at least over remote WiFi.

Hi, Thanks for your reply. i'm using Draytek Vigor 3300. I disabled ALG based on: http://blog.provu.co.uk/item/151 - still no go with 3G. I get ring, I answer it but it doesn't seem to negotiate a codec. From the router I have forwarded the ports I mentioned above and in IPO i have selected...

tipeter: what doesn't work SIP over 3G or SIP behind firewall?

Just a note. Having IPO on public IP address like I mention above - works OK with 2-way audio. I was using a wifi connection that was behind double-nat and it wasn't working - not a typical testing. Now I moved the IPO behind the firewall and I get now one-way audio. I have forwarded on the...

Hi guys, i have an IPO 500 with 8.1 installed and have a license for 3rd party SIP to play around with. Internally I have tested it successfully with Acrobits (iPhone) and x-lite and communication is flawless - no problems whatsoever. When I connect though over 3G with Acrobits I get no sound...

Hi guys! Analogue trunk to trunk wasn't enabled! I enabled it and now it works! Thanks everyone for all the help! Amriddle was right - he had mentioned it but there were so many replies (thanks again for that) that I missed that! :)

TheTaker i did like you suggested... If I dial the HuntGroup (502) it forwards OK to mobile If I dial the Extension (509) it forwards OK to mobile The automatic forwarding from external line doesn't work though still :( I don't have a voicemail system - it is disabled in the "System" - but i...

Actually i don't need to have Internal 500 to ring at all. I want to have forward unconditional and when the forwarding is enabled i want it to ring on the mobile ASAP. The actual case is that at night I want all incoming calls to be directed to a mobile. During the day I want to have a group...

OK I thought the timer of 3 seconds is how long to wait from extension 500 to try extension 510 and then eventually forward it to mobile. So there is a seperate timer for the duration of going through the group members? Will try it and get back to you!

Yes I have 4 PSTN lines... One line is incoming, one of the remaining three should pickup and dial the freaking mobile number.... But no... it doesn't want to do it... You guys think a trace would help? What fields would be interesting for you?

Sorry forgot to mention - i use Unconditional. I didn't try having only 510 in the group, but I tried changing the default inbound route from the Group to directly 510 and it failed also.

Thanks for the replies guys... I already have Hunt Ring Mode (IPO v3.2 - v4.0 not supported on IPO 403). So this is equal to Sequential. At first I had it Group Ring (Collective) and i thought that was the case...

Hi guys, I have an issue with IPO 403.. I have set a call forward to a mobile number on the internal 510. If I dial 510 from another phone then my mobile phone will ring - so forwarding works. Now here is the problem. 510 is a member of a Hunt group (Main) and I have set the answer timeout...

Thanks for the reply IPGuru, i have checked RAS user and BACP and Multilink are enabled. On Windows XP I have multilink enabled as two calls are made. Unfortunately the second call is dropped. You dialout from PC (Windows?) or you try this from another IP Office unit?

Thanks for the hint Matt... I made a new WAN service (that created a user/RAS entry automatically) and changed the number of max chanells to 10. Still the same problem. Don't know if there is something special needed in the WAN service... Maybe the WAN service is referring mostly to connect...

Hi Robb, thanks for the reply. Of course both are enabled. I have fixed all my COMs and double checked everything and not i get this message: http://support.microsoft.com/kb/318718 What I understand is that the first connection is negotiated as Multilink and hence i get 128kbit (2x64kbit...

I have on my IPO 500 a PRI30 ISDN line. I have 2 dialin users using BRI ISDN and they can route through IPO to internet and everything. At one site I have one BRI line and i dialup to the IPO PRI line and all is OK. At the second site I have four (4) BRI lines. Problem is i can dialup with...

Thanks for the quick answer! Will wait till 4.2 then :)

Hi guys, can i use the IPO500 as a SIP server? I already have analog phones and outgoing PRI trunk working. I just want to add some SIP phones as internal extensions or to switch an existing analog internal extension to a SIP internal extension. Is that possible with IPO500 cause I only read...

Hi all, I have an Ericsson FCT connected to an Analog port of the ip office. When I call out from it (I use it to call mobile phones) and the user hangs up the port gets disconnected OK. When somebody dials in though and then hangs up the port isn't disconnect and I get a busy tone. I don't...