Call forward

[murdof]

Hi guys,

I have an issue with IPO 403..

I have set a call forward to a mobile number on the internal 510.

If I dial 510 from another phone then my mobile phone will ring - so forwarding works.

Now here is the problem.

510 is a member of a Hunt group (Main) and I have set the answer timeout to 3 seconds.
I have already set to forward internal and group calls.
Also inhibit off-switch transfer IS NOT enabled.
The hunt groups consists of two internals 510 and 500.

Both 500 and 510 are logged on in the group.

When an external call is made 500 rings, 510 doesn't ring at all and the call is not forwarded.

I have tried to change the default routing from the Main group, to directly 510 - but no luck....

So what else do i need to check to make the forwarding work?

 

[amriddle01]

I'm sure I have already asked that twice....I don't think he likes that question!!!........lol

ACS - IP Office Implement

 

[murdof]

Hi guys!

Analogue trunk to trunk wasn't enabled!

I enabled it and now it works!

Thanks everyone for all the help!

Amriddle was right - he had mentioned it but there were so many replies (thanks again for that) that I missed that!

 

[amriddle01]

Ta Dah!!! lol

ACS - IP Office Implement